**Installing flexible metal conduit Step-By-Step**.
**Step 1: Choose the right size**.
The first step in installing flexible metal conduit is to determine the correct size for your application. Measure the diameter of the wires or cables that will be running through the conduit and choose a conduit that is slightly larger to allow for easy installation.
**Step 2: Prepare the area**.
Before installation, make sure the area where you will be installing the flexible metal conduit is clean and free of any debris or obstructions. This will ensure a smooth and easy installation process.
**Step 3: Cut the conduit to size**.
Using a conduit cutter or hacksaw, cut the flexible metal conduit to the desired length. Make sure the cuts are clean and straight to ensure a secure fit.
**Step 4: Install the fittings**.
Next, install the appropriate fittings on both ends of the conduit. This will allow you to easily connect the conduit to other components of your electrical system.
**Step 5: Thread the wires**.
Carefully thread the wires or cables through the flexible metal conduit, making sure they are properly secured and do not have any sharp bends or kinks.
**Step 6: Secure the conduit**.
Once the wires are threaded through the conduit, secure the conduit in place using clamps or straps. This will prevent the conduit from moving or becoming dislodged during use.
**Step 7: Test the installation**.
Before using the electrical system, test the installation to ensure everything is properly connected and there are no issues. This will help prevent any potential fire hazards and ensure the safety of the system.
Following these steps will help you properly install flexible metal conduit in your electrical system, providing a low fire hazard solution for your export needs.
If you are looking for more details, kindly visit flexible metal conduit low fire hazard exporter, PVC Jacket Flexible Metal Conduit Wholesale, Gooseneck Tube China.