Mud Pumps

06 May.,2024

 

Mud Pumps

Last Updated: 04/19/2024 1:05 PM

MUD PUMPS FOR SALE

If you are looking for more details, kindly visit our website.

 

*PUMPS

OPI 700 HDL TRIPLEX PUMP  (Ref#7719T)  700 hp at 150 rpm, fully rebuilt, Cat 3408 engines (approx. 15000 hours and run very well)  Two available  Price:  $275,000 CDN each

ZB400II  (Ref#14583Tcc)  Series 60, 10 speed transmission with charge pump  Price:  $55,000

SKYTOP BREWSTER 1000T MUD PUMP  (Ref#14583TSS)  Price:  $9,500

NATIONAL 12P-160 TRIPLEX MUD PUMP (Ref#5586T) 3 available in India. 1600 HP, rated pump speed 140 strokes per minute, maximum fluid cylinder liner bore 6¾”, stroke 10", 10,000 PSI hydrostatic pressure of standard cylinder. 2.853 ratio of gears. 10" suction connection, 6" discharge connection. Valve pot mod .7., steel fluid ends, 5,000 psi pulsation dampener. Oilfield skid mounted. Performance Data: at 120 strokes per minute with 6¾” liners, pump will produce 4305 PSI and 574gpm. Set up for electric power.  Dimensions and weight: 84,700lbs, 209"L x 113"W x 75"H. Built 1976.  Located India, removed from offshore drilling rig.
Price: $75,000 each
Available at additional cost: $30,000 for new spares (valued at $80,000 new cost)
Electric motors available at additional cost.

NATIONAL 12P-160 TRIPLEX PUMPS  (Ref#2355R)  3 available, driven by GE752 traction motor, 1600 hp, 12” stroke, 5000 psi, surge chamber, skid mounted, located Middle East  Price:  $310,000

NATIONAL 12P-160 TRIPLEX PUMPS  (Ref#8938R)  3 available, overhauled by National Oilwell (ready in 2-3 weeks after purchase), 1600 hp @ 120 stroke per minute, 12” stroke, 5000 psi, skid mounted, GE Amerimex 752 traction motors, new liners, seats, valves and pistons  Price:  $295,000 each 
Price with 7500 psi fluid ends installed:  $350,000 each

NATIONAL 12P-160 MUD PUMP  (Ref#2062Re)  Refurbished, complete with South West fluid ends and DC traction motors, located Middle East, 3 available  Price:  $720,000 each

NATIONAL 12P160 MUD PUMPS  (Ref#656Ta)  never used, bare pump with top mount for electric motor  Price:  $210,000 each

NATIONAL OILWELL 10-P-130  (Ref#5298T)  new plungers, pulsation dampener, belt driven, no engine, mounted on oilfield skid, sold as is  Price:  $65,000

NATIONAL 10P-130 MUD PUMP  (Ref#13794T)  2 available, pulsation dampener, skid mounted  Price:  $55,000 each

NATIONAL 10P-130 MUD PUMP  (Ref#7746Ta)  Cat C32 engine, Pacific rim gear reduction clutch  Price:  $210,000

NATIONAL 10P-130 MUD PUMP  (Ref#7746Tb)  Cat 3508 engine, pacific rim gear reduction clutch  Price:  $210,000

NATIONAL 10P130 MUD PUMP  (Ref#320Ta)  1300 hp, diesel/DC electric motor, 4 available  Price:  $67,500 CDN each

NATIONAL 8P80 TRIPLEX MUD PUMP  (Ref#9073R)  800 hp, 6-1/2” x 8-1/2”, FS, FS FE w/QC caps and cylinder head caps, Oteco 3” shear relief valve, suction screen, 5 x 6” centrifugal charging pump, powered by Cat 3412 diesel engine, rod cooling pump, Oteco type D pressure gauge, mud valves, bull wheel, master skidded, complete, good condition  Price:  $275,000

NATIONAL 8-P-80  (Ref#6118Ri)  with Cat D379 diesel engine, skidded in building, Hydrill pulsation dampener  Price on Request

NATIONAL OILWELL 850 HP MUD PUMP  (Ref#15442T)  Mattco API-9 fluid end rebuilt, very little use after rebuild, pulsation dampener, no engine, skid mounted  Price:  $22,000

OILWELL 850P MUD PUMP  (Ref#14583TUU)  Price:  $15,500

OILWELL 350 PT MUD PUMP  (Ref#14583TVV)  Price:  $12,500

ELLIS WILLIAM 440 TRIPLEX MUD PUMP  (Ref#11003T)  7000 psi fluid end, 500 hp Detroit 60 Series engine, Allison transmission  Price:  $83,500

NATIONAL 7-P-50  (Ref#6302R)  750 hp, 8” stroke, 6” suction inlet, 4” discharge outlet, piston size 4-1/2” – 7”,  max rod load 85,000#, approx. weight 11,500#, lubrication force fed, steel pump power end, double helical gears, 4.95:1 gear ratio, rod bearings sheel type replaceable, main bearings straight roler, pinion bearings spherical roller, crankshaft 1pc forged alloy steel, connecting rod knuckle joint, crosshead guide bronze replaceable, piston type fluid end Monoblock design, from high strength alloy steel, treated and sonic tested, Cat D379 diesel engine, 500 HP max linear bore size 3-1/2 – 6-1/4 x 7-3/4” stroke, test pressure 10,000 psi, gear ratio 2.742.8” suction line to 4 discharge stroke, location South America  Price:  $110,000

CONTINENTAL EMSCO FB1600 TRIPLEX MUD PUMP  (Ref#1362Tb)  Price:  $235,000

AKMH WIRTH MODEL TPK 7-1/2 x 14 MUD PUMP  (Ref#1362Tc)  2200 CL, gear driven, 2200 hp, 7500 psi, (2) GE AC motors  Price:  $245,000

OILWELL A1700PT TRIPLEX MUD PUMP  (Ref#1362Td)  1600 hp, (2) EMD D-79-MB 800hp DC motors, rated 5000 psi  Price:  $215,000

CONTINENTAL EMSCO FB1600 TRIPLEX MUD PUMP  (Ref#1362Te)  Price:  $235,000

NATIONAL OILWELL VARCO 12P-160 ATRIPLEX MUD PUMP  (Ref#1362Tf)  Price:  $245,000

WIRTH TPK MUD PUMP  (Ref#1362Tg)  2200 hp  Price:  $245,000

IDECO (White Star) T1600 MUD PUMP  (Ref#1362Th) (2) GE752 motors, pump cap 1600 gpm  Price:  $225,000

EMSCO FC2200 MUD PUMP  (Ref#9568Tb)  2200 hp, 4 available  Price:  $100,000 each

NATIONAL 12P-160 MUD PUMP  (Ref#1362Tj)  1600 hp  Price:  $220,000

JWS 300  (Ref#14583TS)  with drives, two available  Price:  $26,500

JWS 400 PUMP AND DRIVE  (Ref#14583TT) Price:  $28,000

JWS 400  (Ref#14583TPP)  Detroit 12V71 engine, Allison 5860  Price:  $59,500

JWS 400 POWER END WITH DRIVE  (Ref#14583TU)  Price:  $16,500

JWS 400 PUMP  (Ref#14583TL)  Cat 3408, Allison 5860  Price:  $49,500

JWS 340  (Ref#14583Tf)  bare pump  Price:  $34,500

NATIONAL JWS340 PUMP  (Ref#10665Ta)  2015 model, bolt on gear reducer couple to Allison 5 speed auto transmission, driven by Detroit 60 Series engine (low hours), 2500 charge pump, discharge manifold.
Price, very good used condition:  $185,000
Price with 6 month warranty:  $220,000

JWS 300  (Ref#14583TW)  Detroit 8V71T, Allison 750 transmission with charge pump  Price:  $38,000

NATIONAL JWS MUD PUMP  (Ref#1205Tc) with Detroit 6V71 engine  POR

NATIONAL JWS300 MUD PUMP  (Ref#2767R)  Series 60 Detroit diesel, 14 liter engine w/Allison transmission, mounted on oilfield skid, major overhaul, completely unitized with fuel tank, fluid end rebuilt by Matco  Price:  $195,000

NATIONAL OILWELL VARCO 308T-7  (Ref#3358T)  4” Ceramic plungers, external drip lubricated, pulsation dampeners, John Deere 400hp engine, bypass oil filter, electric start, 200 gal fuel tank, well maintained, Hansen gear 7.25:1, Cobra with cooler   Price:  $225,000

(2) NATIONAL C350 MUD PUMPS  (Ref#3077N)  Standby – not pump in 15 years.  Pumped chalk continuously at 600 psi in a cement factory.  Complete with electrics and electric motor, complete, bull wheels and guards, complete, fluid end, pistons, liners, and valves.  Low hours.  Located Europe.   Price for both:  $105,000 loaded in a 40’ container   

NATIONAL OILWELL 340  (Ref#14583Tii)  John Deere 12.5L with 5 speed with charge pump  Price:  $70,000

OILWELL 336 INJECTION PUMP  (Ref#14583Te)  electric motor  Price:  $42,000

NATIONAL G700 14” STROKE DUPLEX MUD PUMP  (Ref#8312Ta)  700 HP, 14” stroke, cast iron fluid end, surge chamber, 285 gpm @ 3550 psi with 5” pistons or 805 gpm @ 1265 psi with 8” pistons, mounted on skid 10’ x 23’ with enclosure, sold as is  Price:  $27,500

NATIONAL K500 DUPLEX MUD PUMP  (Ref#2757Tc)  6 cyl Cat engine  POR

IDEAL 250 MUD PUMP  (Ref#10287Ta)  6-1/2 x 15” Twin Detroit 6V71, mounted on low boy trailer fulled with 1983 Ford 8000 truck  Price:  $79,500

NATIONAL C250 DUPLEX MUD PUMP  (Ref#14583TEEE)  Detroit Series 60 engine  Price:  $27,500

NATIONAL C250 DUPLEX MUD PUMP (Ref#7103) 1000# at 56 gpm, powered by twin 671 Detroit diesel on oilfield skid, complete  Price:  $24,500

NATIONAL C250 MUD PUMP  (Ref#9495Tb)  no engine, master skidded, little slack in gears  Price:  $14,500

NATIONAL C-150B DUPLEX MUD PUMP  (Ref#7590R)  7-1/4 x 12, skid mounted, powered by 8V71 Detroit engine  PRICE:  $14,000

IDEAL 6 x 12 MUD PUMP  (Ref#2637T)  671 Detroit engine, mounted on like new drop deck trailer, Matco fluid end, new liners, running  Price:  $52,500

IDEAL C-150 6 X 12” MUD PUMP  (Ref#853Nd)  skid mounted, twin 671 Detroit diesel engines  POR

IDEAL C-150 DUPLEX MUD PUMP 7-1/4 X 12  (Ref#8153Na)  with Detroit 6V71 diesel engine mounted on oilfield skid.   Price:  $55,000

IDEAL C-150-B MUD PUMP  (Ref#8644Td) Price:  $22,000

NATIONAL 5-1/2 X 10” MUD PUMP  (Ref#14556Ta)  skid mounted with fuel tank, 471 Detroit diesel engine, 4 speed transmission, all new injectors  Price:  $16,500

NATIONAL C-100 DUPLEX MUD PUMP SYSTEM  (Ref#10047R)  National C100 duplex mud pump (currently has 5-1/2” liners), gear end and mud end is in good shape, powered by 671 Detroit engine, 1000 gallon fuel tank capacity, tndem trailer mounted (air brakes), fully winterized enclosure with heater unit, locking doors and parts shelves, stairways and rails, 8” steel suction line/hose/sand screen pot/pole winch for adjustment of suction depth,   Price:  $50,000

IDEAL 5 X 10 DUPLEX MUD PUMP  (Ref#9068T)  453 Detroit engine (tall, not short), mounted on 5th wheel trailer, new bearings in crane case, working pump  Price:  $29,500

NATIONAL OILWELL 165  (Ref#14583TGG)  6V71 Detroit with 5 speed  Price:  $34,500

NATIONAL OILWELL 165  (Ref#14583THH)  6V92T with 5 speed  Price:  $34,500

NATIONAL OILWELL 165  (Ref#14583TLL)  Cummins 6BT with 5 speed with charge pump  Price:  $39,500

6-1/2 X 12 IDEAL MUD PUMP  (Ref#580Nc)  mounted on skid trailer with gooseneck, 6V71 Detroit diesel engine -  PRICE:  $42,500

3 DUPLEX MUD PUMPS (NO MOTORS) (Ref#4404N)
1. National G1000, Screw fluid end caps & gear end good, Metal house, Pulsation dampener  Price: $28,000
2. National C-350, Screw fluid end caps & gear end good, Metal house, Pulsation dampener  Price: $25,000
3. Oilwell 220P, Screw fluid end caps & gear end good, Metal house, Pulsation dampener  Price: $25,000
Location: Wyoming.

3 DUPLEX MUD PUMPS (Ref#912N)
Ideco 1250: $70,000
National N1100: $70,000
National N900: $70,000
All with pulsation dampeners and on skid
No power
Have been stacked for years

HONGHUA HHF500 MUD PUMP  (Ref#9119T)  500 HP horizontal, single acting triplex piston pump, 6-3/4” max cylinder liner diameter, 7-1/2” stroke, 165 spm, 4.286:1 gear ratio, 65 gal crankcase capacity, 300 ft/lb tightening torque, 30” wrench length, 120 lbs force on wrench, gear oil pump with 5 hp motor, centrifugal pump with 5 hp motor, Reastar transmission, 2012 Cummins KTA19P engine 750 hp wit approx. 4600 hours, inluces $75,000 in spare parts, located South Asia  Price:  $92,500

NF-500 (CHINESE MANUFACTURED0 500 hp MUD PUMP  (Ref#13723R)  Manufactured 2011, 550 gpm@3000 psi, Cat C15 diesel engine, pulsation dampener, mounted on Galvanized jack-up base, located Australia  Price:  $280,000

SKYTOP BREWSTER 7-1/4 X 14” MUD PUMP  (Ref#13399Rb)  379 Cat didsel engine, Matco hi pressure forged steel fluid end, quick change valve heads, Hydril dampener, brand new expendables sill in box  Price:  $59,500

14” x 6” BREWSTER 550 MUD PUMP  (Ref#9495Ta) no engine, gear end good shape, master skidded w/motor skid  Price:  $14,500

IDECO 550 7-1/4 X 15 MUD PUMP  (Ref#1198T)  Skid mounted, Cat 353 engine, air clutches, Matco fluid end, 120 gal aluminum fuel tank  Price:  $47,500

OILWELL 14PDH  (ref#3813R)  7-1/4 x 14, Matco fluid end with screw type valve, covers and cylinder heads, Detroit 8V71 diesel engine, surge chamber, pip-off valve, 10 groove pully, 5-1/2” liners, mounted on oilfield skid, 1 year warranty on motor,  Price:  $90,000

OILWELL P214 14” DUPLEX MUD PUMP  (Ref#6017Tb)  skid mounted, Cat 3406, Matco fluid end, air clutches  PRICE:  $29,500

OILWELL 4 X 6 MUD PUMP  (Ref#8578T)  New belts, diesel power, new mud end parts, mounted on skid on 8’ x 16’ gooseneck trailer, ready to work  Price:  $28,000

OILWELL 4 X 6 DUPLEX MUD PUMPS  (Ref#11652RC) no engine, skid mounted, (2) available   Price:  $8,750 each

CAT MODEL 152R TRIPLEX PUMP  (Ref#14583Tb)  unused, 165 hp, AB fluid end  Price:  $24,500

OMEGA 600  (Ref#14583TZ)  Detroit 12V71, Allison 5860  Price:  $49,000

EWS 440 UNITIZED MUD PUMP PACKAGE  (Ref#599N)  refurbished Detroit Series 60 engine, refurbished Allison transmission, input horsepower rating 440 max, 320 max pump speed rating, 6” stroke length, 4-1/2” maximum piston size, 3000 psi fluid end working pressure rating, 3” (as required) discharge connection size, 6” (as required) suction connection size, 2” NPT accessory connection size, API#4 valve size, API#S-2 piston rod end, 35 gallon cancase oil capacity, 24 gallons liner wash capacity, internal gear ratio:  4.58:1, 6.517:1.  Price:  $200,000

DRAGON W-440 TRIPLEX 6” MUD PUMP (Ref#7756Ta)  skid mounted on 8’ x 28’ skid, Detroit 60 Series 8 cyl Turbo diesel power plant with 440 hp, on board fuel tank, M310 Series control panel  Price:  $132,500

L & L SMC T135-5 TRIPLEX 6” MUD PUMP  (Ref#7756Tc)  mounted on 7’ x 21’ skid, Cat 6 cyl turbo diesel engine, in-line style system, hyd tanks  Price:  $29,500

MCFARLAND P38 PUMP  (Ref#3917Ta)  low hours, 1”, 10,000 psi set up, pump can be configured for 18,000 or 25,000 psi, 60 hp electric motor, skidded  Price:  $27,500

FAMMCO TRIPLEX PUMP (Ref#2760T)  2 x SPM 600 HP 10K, 3-1/2 x 6’ stroke plunger, powered by (2) Cat C12 400 hp diesel engines, (2) Allison HT750 trans., (2) 4 x 5 cent pumps, (2) 5 x 6 slurry mixing pumps, 6 bbl mixing tub, 14 bbl averaging tub, mounted on 2002 tandem axle 8’6”W x 50’ step deck trailer  Price on Request

WHEATLEY F400 TRIPLEX PUMP  (Ref#14583TV)  Detroit 8V71, 5 speed  Price:  $15,000

WHEATLEY P323 FOAM UNIT  (Ref#14583TNN)  Cummins 4BT with 5 speed, AB Fluid end with pit  Price:  $14,500

TULSA TRIPLEX 560 POWER END WITH DRIVE  (Ref#14583TX)  Price:  15,500

GARDNER DENVER PZ-11  (Ref#10748R)  approx. 7000 hours, Cat 3512C (1476 hp), 5000 psi fluid end cylinder, 5-1/2” piston cylinder, antifreeze heaters, WPT W21-CG-300 Type 1 PTO clutch, 16 groove drive sheave, 16 groove bullwheel, 16 groove Kevlar belt with necessary guards, 5 x 6 x 11 charge pump c/w 50 hp@1200 rpm electric motor.  Discharge plumbing: 2” 5M XXH B/W Oteco gate valve, 4” 5M XXH b/w Oteco gate valve, 3” 5M Oteco popoff valve w/1502 connection, 2” 5M type D Oteco mud gauge with 1502 connection, Hydril 20 gal 5M pulsation damper.  Mounted on oilfield skid with separate, with expendables cabinet, knowledge box and removable engine skid for breaking the engine and pump into separate smaller loads.  Winterization package, oilfield lighting, explosion proof starters for charge pump, rod oiler pump and liner wash pumps.  Price:  $695,000 - Make Offer

GARDNER DENVER PZ11  (Ref#13329T)  2 available, rated for 7500 psi , new Cat 3512C (2250 hp) motor with new Cat CX48 transmission POR

GARDNER DENVER PZ-11 MUD PUMP  (Ref#2062Ra)  DC traction motors, refurbished to CAT-IV, located Middle East  Price:  $700,000

GARDNER DENVER PZ9 TRIPLEX MUD PUMPS  (Ref#10825Tb)  Two available, Cat 3412 engines (750 hp), spare parts  Price:  $87,500 each

GARDNER DENVER PZ9 TRIPLEX MUD PUMPS  (Ref#7062T) Two Available, each complete with Cat 3508 diesel engines, pulsation dampener, and mud tanks with desander, desilter, etc.  Price for Package:  $110,000

GARDNER DENVER PZ9 MUD PUMP  (Ref#1958Ta)  Skid mounted, Cat 3508 engine, pulsation dampener, needs new pistons and liners Price:  $185,000

GARDNER DENVER PZ9  (Ref#5297T)  Cat D399 engine, pulsation dampener, skid mounted  Price:  $120,000

GARDNER DENVER PZ9 BARE PUMPS  (Ref#14583TMM)  Two available  Price:  $35,000 each

GARDNER DENVER PZ9  (Ref#14583TRR)  Cat 398 engines,  Price:  $41,500

GARDNER DENVER PZ-9  (Ref#2062Rb)  DC Traction motor, refurbished to CAT-IV, located Middle East  Price:  $450,000

GARDNER DENVER PZ8 MUD PUMP  (Ref#1958Tb)  Skid mounted, Cat 3508 engine, pulsation dampener, needs new pistons and liners  Price:  $160,000

GARNDER DENVER PZ8  (Ref#2062Rc)  Cat D379 engine, new fluid end assembly, located Middle East  Price:  $420,000

GARDNER DENVER PZ8  (Ref#862T)  Rebuilt, complete, 8” stroke, 750 hp, alloy steel modular flud cylinders, 6-1/2” liners, liner wash system, API 7 valve pots, gear reducer, steel billet fluid end, pulsation dampener, suction connection, FF discharge connection, 4.5 gear ratio, skid mounted, 130”L x 88”W x 54”H  POR

GARDNER DENVER PZ8  (Ref#14583TJJ)  Bridges drive  Price:  $39,500

GARDNER DENVER PZ7  (Ref#8588N)  US manufactured, freshly rebuilt, new Detroit Series 60 engine, Allison transmission, pulsation dampener, complete and ready to go.  Price:  $375,000

GARDNER DENVER PZ7 STYLE TRIPLEX MUD PUMP  (Ref#1245Nb)  Reconditioned, inspected and tested.  550 hp input, Cat D379PCTA diesel engine (reconditioned), air start, muffler, standard instrument gauge panel, mounted on Cat rails, new 20CB500 air clutch, reconditioned radiator.  Belt drive assembly consisting of pump drive sheave, pump drive belts with belt guard, engine drive sheave, engine drive belts with belt guard, pillow block bearings.  Reconditioned Continental Emsco PD-45 12 gallon 5000 psi WP pulsation dampener.  New O’Drill/MCM ORV 21050 2” 1,000 – 5,000 psi WP shear relief valve.  New O’Drill/MCM 2” 0 – 6,000 psi WP type D mud pressure gauge.  PZ7 fluid modules complete with suction manifold and discharge strainer cross.  New CA-122 liner wash pump, pinion driven with spary nozzle system, water tank and hoses.  New fluid end expendables with 6” liners.  (3) runner oilfield type master skid with loading hitches.  New 5 x 6” R.H. centrifugal 178 series charge pump, 1-7/8 shaft, 10” impeller size, belt driven off pinion shaft, drive belts with belt guard.  New 6” fgure 400 hammer union.  New 4” 5000 psi WP gate valve, new 200 gallon air receiver tank, new air controls.  Price:  $455,000

GARDNER DENVER PZ7 MUD PUMP  (Ref#45Tb)  Powered by electric motor, power end looks, good, may  need valves, seats, liners and pistons.  Price:  $79,500 as is

GARDNER DENVER PZ7 MUD PUMP  (Ref#45Tc)  Powered by 379 Cat diesel engine with chain reduction box, engine may need work, pump may also need valves, seats, liners and pistons.  Price:  $72,500 as is

GARDNER DENVER TGH/PAH TRIPLEX PUMP  (Ref#45Ta) powered by a Caterpillar C-13 diesel engine through an Allison Automatic transmission.  This is equipped with 4" plungers.  Price:  $139,500 as is. 

NEW PAH GARDNER DENVER PUMP TRIPLEX MUD PUMP  (REF#3804Ra)
Fitted with 5" Liner and pistons, bare pump, no extras, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED.
PRICE $175,000.00 each – Delivery 18 weeks
Approximate weight 9,300#
Approximate dimensions 106” long x 67” Wide x 511/2” High

NEW PAH GARDNER DENVER TRIPLEX MUD PUMP  (Ref#3804Rb)
Fitted with 5” liners and pistons with washing and lubricating system, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with a rebuilt Detroit Diesel V1271 w/ Twin Turbo, 550 HP, with a chain case and a manual transmission
PRICE: $210,000.00 each 
Delivery 18 weeks

NEW PAH GARDNER DENVER TRIPLEX MUD PUMP  (Ref#3804Rc)
Fitted with liner & pistons, with rod washing & lubrication system, bare pump no extra's, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with New CAT C13 (440 HP) diesel power unit, w/hand clutch, belt drive, belt guard, fuel tank.
PRICE $280,000.00 each
FOB Factory Delivery 18 Weeks (longer for multiple units)
Approximate Dimensions 81/2’ Wide x 16’ Long x 60” High
Weight approximately 19,000#

NEW PAH GARDNER DENVER PUMP TRIPLEX MUD PUMP  (Ref#3804Rd)
Fitted with 5" Liner and pistons, w/washing & lubricating system, THIS PUMP REQUIRES PRESSURE LUBRICATION OF THE POWER END (AUXILIARY OIL PUMP REQUIRED) THIS IS NOT INCLUDED, skid mounted with New CAT C15 (540 HP) diesel power unit, with manual transmission with 4 to 1 gear case, fuel tank.
PRICE $335,000.00 
Delivery 18 Weeks

OPTIONAL EQUIPMENT FOR PAH GARDNER DENVER TRIPLEX MUD PUMP  (Ref#3804Re)
Rod lubricating system (fluid end)  (includes:   hose, fitting, pump & tank)
PRICE:  $4,560 each
Pressure gauge PRICE: 1,200.00 each
Pressure relief valve PRICE: $1,020.00 each
Surge Chamber PRICE:  $24,000 
Charging pump (includes:  centrifugal pump, hose from pump to pump, either hydraulic drive or belt drive) PRICE:  $5,040 each
Gear box  PRICE:  $14,820 each
Chain case PRICE:  $14,400 each
Auxiliary Oil Pump (gear end) (includes: hose, fittings, oil cooler pump, belt drive) PRICE:  $6,000.00 each

GARDNER DENVER PAH MUD PUMP  (Ref#11003Tb)  Detroit 12V71 engine (rebuilt), Allison transmission, rebuilt engine  Price:  $87,000

GARDNER DENVER PAH  (Ref#14583Tbb)  Series 60, Allison 5860 with charge pump  Price: $65,000

GARDNER DENVER PAH MUD PUMP  (Ref#7546T)  8V92 Detroit diesel engine, Allison transmission, choke manifold on unit and charge pump, pistons and liners,  Price on Request

GARDNER DENVER PAH  (Ref#14583TKK)  Detroit 12v71 with Allison 5860 transmission, charge pump  Price:  $59,500

GARDNER DENVER PAH POWER END  (Ref#14583TO)  Price:  $12,500

GARDNER DENVER PAH  (Ref#14583TOO)  Detrot 8V71, 5 speed  Price:  $39,000

GARDNER DENVER PAH  (Ref#14583TQQ)  Detroit Series 60, Allison 5860 charge pump  Price:  $47,500

GARDNER DENVER PAH 275 TRIPLEX MUD PUMP  (Ref#8169Rb) powered by NTC0855 Cummins engine Price on Request

MUD KING PAH MUD PUMP  (Ref#12669T)  Detroit Series 60 engine, Allison 750 transmission, 3” centrifugal pump, 90 bbl 2-compartment circulating tank  Price:  $290,000
Available at extra cost:  8700’ 2-3/8 PH6 P10, 23 BOPD

GARDNER DENVER PA8  (Ref#8509T)  Series 60 Detroit diesel, 4” plungers, mounted on oilfield skid, needs new expendables and battery, sitting 4-5 years Price:  $55,000

GARDNER DENVER PA8  (Ref#14583TM)  Price:  $17,500

Gardner Denver PA8 mud pump (Ref#4384Tc) with Detroit 8V engine (rebuilt) Price on Request

Gardner Denver PA 8 mud pump (Ref#4384Td) with Detroit 60 Series Price on Request

GARDNER DENVER TA3 FOAM UNIT  (Ref#14583TN)  Cat 3304, AB Fluid end   Price:  $17,500

GARDNER DENVER TA3  (Ref#14583TQ)  AB fluid end  Price:  $12,000

KERR 2200 AND 3500 OR FMC M1214 TRIPLEX MIST PUMPS  (Ref#7999T) Cat engines, 4 speed transmissions, rigged up with secondary containment, onboard lighting, winterization canvas for cold weather operations, Also available with Cummins or John Deere engines Priced from $77,500 to $97,500

GARDNER DENVER PQ172 TRIPLEX MIST PUMP  (Ref#7827Ta)  Deutz F3L914 45hp 3 cyl air cooled diesel engine with electric start, manual transmission, gauges, 4’H x 4’W x 7.5’ long, 3” hardline, 22 bbl mixing tank, skid mounted  Price:  $17,500

GARDNER DENVER GXP TRIPLEX 6 X 16 MUD PUMP  (Ref#11010T)  Skid mounted, twin Detroit 671 diesel engines, 30 ton, dimensions: 28’L x 11’W x 8’H   Price:  $32,500

GARDNER DENVER GXR 800 HP DUPLEX MUD PUMP  (Ref#12423Rb)  Matco steel fluid end, pulsation dampener, fuel tank, gauges, controls, starter, mounted on oilfield skid, completely rebuilt engine and fluid end  Price:  $125,000

7-1/4” X 16” MUD PUMP  (Ref#8229TA) Mounted on 2010 Western Star lowboy with with (2) Detroit 6V71 engines
Available as package with the following:
1996 Volvo with flat bed trailer (Ref#8229TB), 40’ x 10’ mud pit, shaker & desanders
Package Price:  $160,000

GARDNER DENVER 7-1/4 X 14 MUD PUMP  (Ref#6012T)  (2) Detroit 6V71 engines, skid mounted on a low boy trailer  Price:  $52,500

GARDNER DENVER FXN 7-1/4 X 14 MUD PUMP  (Ref#1403T)  Cat 3408 engine air start with pump drive and belt guard, PD55 Hydril dampener, 750 gallon fuel tank, mounted on heavy duty drop deck tandem trailer,  low hours  Price:  $67,500

GARDNER DENVER FXN 7-1/2” X 14” DUPLEX MUD PUMP  (Ref#8312Tb)  500 hp, on skid with Cat D343 engine, capable of 200 gpm @ 3000 psi with 4” pistons or 775 gpm @ 940 psi with 7-1/2” pistons, sold as is  Price:  $27,500

GARDNER DENVER FXN 7” X 14” DUPLEX MUD PUMP  (Ref#6637Ta)  Forged steel fluid end, quick change caps, Cat 3412 diesel engine, Hydril K20 3000 pulsation dampener, Demco 2” relief valve, belt drive, type F3000# pressure gauge, rod oiler pump, speed sensor, electric start, air clutch, skidded with roof, 3-1/2” x 20’L vibrating hose  Price:  $76,000

GARDNER DENVER 7-1/4 X 12 FXZ MUD PUMP  (Ref#1865Tb)  Skid mounted, 318 Detroit engine, Matco fluid end, belts, guard, flywheel, 120 gal aluminum fuel tank, toolbox.  Will mount on trailer   Price:  $39,500

GARDNER DENVER FXZ 7-1/2 X 12 MUD PUMP  (Ref#1860T)  Detroit 60 Series engine, high torque convertor, 6-1/2” liners but owner will install 7-1/2” liners  Price:  $47,500

GARDNER DENVER FZ-FXZ MUD PUMP  (Ref#4087Tb)  7-1/2 x 12, Tier 1 Detroit diesel 60 Series, 12.7L 500 hp, good gear and fluid ends, same-trailer mounted, 500 gal fuel capacity  Price:  $90,000

GARDNER DENVER FXZ MUD PUMP  (Ref#1850T)  Detroit 8V71 engine, air clutch, skid mounted  Price:  $37,500

GARDNER DENVER 7-1/2 X 12 MUD PUMP  (Ref#5651T)  Detroit engine, skid mounted, stored inside  POR

GARDNER DENVER FXZ 7” X 14” DUPLEX MUD PUMP  (Ref#6637Tb)  Twin 671 engines, 1800 psi  Price:  $55,000

GARDNER DENVER 7-1/4” X 12” GARDNER DENVER MUD PUMP  (Ref#5896Rf)  4 runner base  POR

GARDNER DENVER FXZ 6-1/2” X 12” MUD PUMP  (Ref#10287Tb)  Detroit 8V71 engine, hauled on 3 axle skid trailer with 1989 TTRAC International truck  Price:  $69,500

GARDNER DENVER FXN DUPLEX MUD PUMPS  (Ref#8214R)  Two available, 14” stroke, 2” rod size, 400 hp, 75 strokes per minute, cast fluid ends, unitized on oilfield skid with Cat 3406 diesel engines, air start, new filters, oil and coolant, air receiver on deck, fluorescent lighting, drive belts with air clutch.  Gone over and in good operating condition, ready to be put into service.  Pumps currently have new 6” liners with production being 480 gpm @ 1000 psi.  All fluid end parts are brand new and never used, including the valves, gears, liners, pistons, rods, head gasket, and rod packing, equipped with pulsation dampener.  32’ long x 11’ wide x 7’ high 50,000# weight  Price:  $72,500 each

GARDNER DENVER FXO 7-1/2 X 10 MUD PUMP  (Ref#10447Rb)  skid mounted, 350 Cummins diesel Price: $32,000

GARDNER DENVER FXO 7-1/2 X 10 MUD PUMP  (Ref#5295T)  Cat 3306 engine, like new, fuel tank  Price:  $39,500

GARDNER DENVER FXO 7 X 10 MUD PUMP  (Ref#250T)  6V71 Detroit engine, mounted on single axle trailer with air brakes, good shape  Price:  $35,000

GARDNER DENVER FXZ 7-1/4 x 12”  (Ref#8810R)  Trailer mounted, suction rod, suction strainer, twin GMC 150 hp engines, flywheel, belt guards, totally rebuilt 2011  Price:  $100,000

GARDNER DENVER 7-1/4 X 12” MUD PUMP  (Ref#10428Tb)  new pistons, propane engine  Price:  $44,500

GARDNER DENVER FXZ 7 1/4 X 12 MUD PUMP  (Ref#6414RB) 6” liners, trailer mounted with Detroit 8V71 engine  Price:  $80,000

GARDNER DENVER FXZ 7 X 12 MUD PUMP (Ref#6602RD) only 1300 hours on new 12 Liter Volvo engine, air clutches, skid mounted, 20’L x 9’7”W x 8.4”H, 40,000#  Price:  $45,000

GARDNER DENVER 7 1/2 X 10 MUD PUMP  (Ref#14202RB) 4 cyl Detroit engine, skid mounted  Price on Request

GARDNER DENVER 7 X 10” FXZ MUD PUMP  (Ref#853Nc)  skid mounted, 671 Detroit diesel engine,  POR

GARDNER DENVER FXD-172 MUD PUMP  (Ref#8644Te) Price:  $20,000

GARDNER DENVER 5-1/2 X 8 MUD PUMP  (Ref#3017T)  62 hp diesel engine, gears 90%, skid mounted  Price:  $42,500

GARDNER DENVER 5-1/2 X 8 FXN DUPLEX MUD PUMP  (Ref#6678T)  Cast fluid end, 671 Detroit, Spicer 6853-C transmission, hydraulic pump, air controls, 1” hyd hoses, skidded  Price:  $44,500

GARDNER DENVER 5-1/2 X 8 MUD PUMP  (Ref#14066Tb)  only 60 hours, trailer mounted Price:  $27,500

GARDNER DENVER 5-1/2 X 8 MUD PUMP  (Ref#9782Ta)  New 2014, used 5 years, extra swabs and liners, ready to use  Price:  $36,500

GARDNER DENVER 5-1/2 X 8 DUPLEX MUD PUMP  (Ref#10501Td)  Rebuilt and complete with hydraulic drives   Price on Request

GARDNER DENVER 3FXX172 5-1/2 X 8 MUD PUM POWER END  (Ref#3207Tb)  Price:  $38,000

GARDNER DENVER 5-1/2 X 10 MUD PUMP  (Ref#433Ta)  new fluid end, new clutch, diesel poiwer, mounted on trailer, runs great  PRICE:  $34,000

GARDNER DENVER 5 1/2 X 10 MUD PUMP (Ref#3261Rb)  6 cylinder Cummins diesel engine, hand clutch, 5 speed transmission, 5-1/2” liners, skid mounted, 10” stroke, ready to work  Price on Request

GARDNER DENVER 5 X 10 DUPLEX MUD PUMP  (Ref#3373Tc)  Cummins engine, mounted on tandem axle lowboy trailer  Price:  $18,500

GARDNER DENVER 5 X 10 MUD PUMP  (Ref#1480Tb)  air driven, used with cement for grouting wells, sitting 3-4 years, valves will need rebuilding, trailer mounted, air over hydraulic brakes, includes 28 joints of 21’ pipe  Price:  $39,500

GARDNER DENVER 5 X 10 MUD PUMP  (Ref#5882Tb)  453 Detroit engine, battery start, mounted on oilfield skid with axles, starts and runs  Price:  $14,500

GARDNER DENVER FDFXDH MUD PUMP  (Ref#14457T)  4” inlet, 3” outlet, pulsation dampern, new piston and rods, engine has been removed    Price:  $40,000

GARDNER DENVER 5 X 10 MUD PUMP AND GARDNER DENVER 5 X 8 MUD PUMP  (Ref#6082T)  no engine, both were removed from rig  Price for both pumps:  $29,500

5-1/2 x 8” GARDNER DENVER MUD PUMP  (Ref#4523N)  Manufactured 1960’s, rebuilt a couple years ago, skid mounted, 4 cylinder Detroit engine, used Supercharger, 637 hours on it, runs good, needs cosmetic work  Price:  $32,500

GARDNER DENVER 5 X 8 DUPLEX MUD PUMP  (Ref#3373Tb)  6 cylinder Isuzu diesel engine  Price:  $20,000

GARDNER DENVER 5 x 8 MODEL FDFXDG DUPLEX MUD PUMP  (Ref#8406Td)  Cummins V504P (195 hp) engine, skid mounted  Price:  $42,000

5 x 8 GARDNER DENVER DUPLEX MUD PUMP (Ref#755Nb) on tandem axle trailer with 371 Detroit diesel engine Price on Request

GARDNER DENVER MUD PUMP  (Ref#7397T)  running condition, diesel engine, mounted on trailer with new tires  Price:  $13,500

5 X 6 MUD PUMP  (Ref#538T)  no engine, skid mounted, rebuilt  Price:  $18,500

FAILING 5 X 6-1/4” MUD PUMP  (Ref#7865T)  needs new pistons, bare pump  Price:  $4,800

GARDNER DENVER 5 X 6 MUD PUMP  (Ref#2328Tb)  no engine, unmounted  Price on Request

GARDNER DENVER 5 X 6 MUD PUMP  (Ref#282Tb)  Taken off IR TH60 rig  Price on Request

GARDNER DENVER 5 X 6 FXG MUD PUMP  (Ref#10220Tb)  bare pump, (old style), good condition  Price:  $24,000

GARDNER DENVER 5 X 6 MUD PUMP  (Ref#10741Ta)  skid mounted, Detroit engine, 3-speed transmission  Price:  $24,500

GARDNER DENVER FG-FXG 5 X 6 MUD PUMP  (Ref#3510R)  Detroit diesel engine, mounted on tandem axle trailer, one suction and one discharge hose included  Price:  $39,500

GARDNER DENVER 5 X 6 MUD PUMP (Ref#3261Rc) skid mounted with John Deere gas engine, broken manifold exhaust  Price on request

GARDNER DENVER 5 X 6 AIR DRIVEN MUD PUMP (Ref#7778RB), complete but needs rebuild  Price:  $10,500

GARDNER DENVER 5 X 6 AIR DRIVEN MUD PUMP (Ref#7778RC) with trailer  Price:  $19,500GARDNER DENVER 5 X 6 MUD PUMP  (Ref#4513Ta)  skid mount with Deutz diesel engine, fully set up and ready to run  Price on Request

GARDNER DENVER 5 X 6 MUD PUMP  (Ref#13203T)  electric drive, in custom skid, fully rebuilt gear end and fluid end, excellent condition  Price:  $22,500

GARDNER DENVER FXG 5 X 6 MUD PUMP (Ref#11652RA) with Detroit engine, skid mounted  Price on Request

GARDNER DENVER 5 X 6 MUD PUMP  (Ref#13101Ra)  old style

GARDNER DENVER 5 X 6 MUD PUMP  (Ref#11990T)  no engine, unmounted, liquid fluid end, needs rebuilt  Make Offer

GEFCO 5 X 6 MUD PUMP  (Ref#11938T) Removed from rig, hydraulic driven, 0 hours after rebuilt, includes rebuild kit  Price on Request

GARDNER DENVER 4 x 6 DUPLEX MUD PUMP  (Ref#7756Tb)  Detroit 671 diesel engine, stick shift transmission, tubing racks, skid mounted  Price:  $29,500

GARDNER DENVER 4 X 5 MUD PUMP  (Ref#2115T)  6 cyl Ford 300 gas engine, self contained trailer mounted  Price:  $13,500

GARDNER DENVER FXF-DE8 4 X 5 MUD PUMP  (Ref#10148T)  Manufactured 1996, new condition of gear and fluid ends, no engine, new 4” liners, new pistons, new chrome rods, new valves, new liner studs in head, new suction flange and gasket, new 2” steel discharge flange  Price:  $13,500

FAILING 4 X 5 MUD PUMP  (Ref#7865Tb)  bare pump  Price:  $4,000

FAILING 4 X 4 MUD PUMP  (Ref#4244T)  no engine, good condition  POR

4 x 5 GARDNER DENVER MUD PUMP  (Ref#1653N)  skid mounted, Detroit diesel  Price:  $15,000

4 x 5 GARDNER DENVER PISTON MUD PUMP  (Ref#7097Rb)  bull wheel or can be connected to hydraulic motor, 75% condition, needs some work  Price:  $5,500

4 x 5 GARDNER DENVER FXG-172 MUD PUMP  (Re#137T)  no engine  Price:  $11,500

5” x 6” GARDNER DENVER PISTON PUMP  (Ref#9667Rb)  new sleeves, new piston, rods and piston heads  Price:  $23,500

5” x 6” GARDNER DENVER MUD PUMP  (Ref#3538)  Manufactured 1996 - skid mounted, Ford diesel 70 hp,     Price:  $15,000

GARDNER DENVER 5 X 6 MUD PUMP  (Ref#2346R) hydraulically driven  Price:  $13,500

GARDNER DENVER 5 X 6 HYDRAULICALLY DRIVEN MUD PUMP  (Ref#2505T)  approx. 2500 hours, unmounted, (taken off a rig), fluid ends have not been rebuilt  POR

GARDNER DENVER 4 X 8 MUD PUMP (Ref#7349TB) Skid mounted, on trailer, less than 100 hours on 460 diesel engine, 2” liners  Price:  $52,500

GARDNER DENVER PE5U 4X5 TRIPLEX MUD PUMP (Ref#11077c)  powered by Cat 3306 diesel engine, Eaton 5-speed transmission, manifold, enclosed building  Price:  $72,500

GARDNER DENVER TEE PUMP  (Ref#1654T)  Manufactured 1998, 1602 hours, 4" plungers with hydraulic charge pump, Detroit Series 50 (rebuilt), 5 speed, Skid mounted with fuel tank, Rebuilt expendables with seals, valves, seats, packings and gaskets.  Price:  $72,500

GARDNER DENVER TEE PUMP  (Ref#1654Tb)  1148 hours, Detroit Series 50, 5 speed transmission, hydraulic charge pump  Price:  $72,500

GARDNER DENVER TEE MUD PUMP  (Ref#4692Tc)  diesel engine, skidded  Price:  $25,000

GARDNER DENVER TEE MUD PUMP  (Ref#6440T)  New, unused, manufactured 2014, 4 available, bare pumps  Price:  $39,500 each  New Cat C7 engines available at additional cost

GARDNER DENVER TEE PUMP  (Ref#14583TG)  AB Fluid end  Price:  $34,500

GARDNER DENVER TEE PUMP (REF#14583Ti)  Detroit 6V92 engine, 5 speed trasnmssion  Price:  $30,000

GARDNER DENVER TEE  (Ref#14583TFF)  6V71 Detroit with 5 speed, serviced with new oil, filters and new pump expendables  Price:  $34,500

GARDNER DENVER 4 X 5 MUD PUMP  (Ref#8390Tb)  4 cyl Ford motor, mixing/receiving mud tub, skid mounted  Price:  $7,000

GARDNER DENVER TEE 4 X 5 TRIPLEX MUD PUMP  **NEW**  (Ref#9115R)  4” piston and liners, well servicing valve and seats, bare pump, extras a extra cost, 2 available (1 plunger and 1 piston)  Price bare pump:  $64,000

GARDNER DENVER PUMP PACKAGE  (REF#108N)

  • Gardner Denver TEE 3 x 5 pump, 3000#, pump skid, 6V-71 Detroit diesel engine, 5 SP, 93”W x 233”L x 100”H
  • Gardner Denver TEE 3 x 5 pump, 3000#, pump skid, 6V-71 Detroit diesel engine, 5 SP, 100”W x 216”L x 102” H

Located Canada
PRICE:  $60,000

GARDNER DENVER 3 X 5  FXG-172 DUPLEX MUD PUMP  (Ref#15252Tb)  no engine, bare pump, new never used  Price:  $24,500

DUPLEX MUD PUMPS- USED AND REBUILT (Ref#7814N)
AVAILABLE IN 2 MONTHS AFTER REBUILT
(1) NATIONAL C250 DUPLEX MUD PUMP  7-1/4 x 15”, New fluid end parts, bolt on valve cover, Rebuilt gear end, Pulsation dampener, new Cat C15 diesel or 12V71 diesel engine, Electric start, Controls, gauges, safety shut off, Master skid   Price with Cat engine:  $135,000   Price with Detroit engine:  $120,000
GARDNER DENVER FXK 7 1/4 x 14” DUPLEX MUD PUMP  New fluid end part, Rebuilt gear end, Detroit 12V71 diesel engine, Electric starter, Controls, gauges, Safety shut off   Price: $80,000
(2) NATIONAL C-150 DUPLEX MUD PUMP 6 ¾ x 12”  250 gpm / 550 PSI, New fluid end part, Rebuilt gear end, Pulsation dampener, Detroit diesel engine, Electric start, Controls, safety shut down, Master skid  Price: $80,000   6 weeks delivery
7” x 12” WHEATLEY DUPLEX MUD PUMP  (rebuilt), Model 27-12, powered by rebuilt 671 Detroit diesel engine, rebuilt gear end and fluid end, with all new fluid end parts, hand clutch, pulsation dampener, rod lubricating gland, pressure gauge, pressure relief valve, belt drive, belt guard, fuel tank, battery start, mounted on oilfield skid, cleaned and painted, guaranteed for 6 months, delivery 12 weeks after order  Price:  $42,000     Delivery 12 weeks

CENTERLINE 7-1/2 X 10 DUPLEX MUD PUMP  (Ref#932T)  Manufactured 2008, currently mounted on a drill rig, working condition  Price:  $49,500

CENTERLINE 7-1/2 X 10 MUD PUMP  (Ref#14556Tb)  high pressure, no engine, needs retaining liner cage and (1) side suction manifold needs replacing, unmounted  Price:  $39,500

14 x 7 MUD PUMP (Ref#10681Ta)  with engine  Price:  $40,000

WHEATLEY 6 X 6 MUD PUMP  (Ref#4827T)  bare pump, no motor, good condition  Price: $7,000

WHEATLEY 5 X 10 MUD PUMP  (Ref#11739T)  Skid mounted, Detroit 471 engine  Price:  $19,500

WHEATLEY 5 X 10 MUD PUMP AND KING SWIVEL  (Ref#1557Nm)  20 bbl tank, mounted on gooseneck double axle dual tires trailer, 1995 International single axle tractor, hoses, hydraulic valves and hoses  Price:  $95,000

WHEATLEY 5 X 8 MUD PUMP  (Ref#10681Tb)  no engines, unmounted

WHEATLEY 4 X 6 MUD PUMP  (Ref#5278Ta) Oversized liners 4-1/2 x 6, John Deere/Yanmar engine, rebuilt before stored and not used since  Price:  $21,000

MID CONTINENET D700 PUMP  (Ref#14583TXXX)  rebuilt pump  Price:  $14,500

IDECO MM700 DUPLEX MUD PUMP  (Ref#14583TAAA)  Cat 3508 engine  Price:  $27,500

IDECO MM700 DUPLEX MUD PUMP  (Ref#14583TBBB)  Cat D379 engine  Price:  $19,500

EMSCO DB700 MUD PUMP  (Ref#14583TDDD)  Cat D379 engine, two available  Price:  $24,500 each

EMSCO DB500 MUD PUMP  (Ref#14583TCCC)  Cat D353E engine, two available  Price:  $24,500 each

CONTINENTAL EMSCO D500 DUPLEX MUD PUMP  (Ref#5074Tb)  Trailer mounted, Detroit Series 60 diesel engine 14L, 40’ tandem axle trailer with hydraulic leveling jacks, currently working  Price:  $87,500

EMSCO D500 MUD PUMP  (Ref#6593T)   Cat D353 engine, does not run, mounted on oilfield skid  Price:  $50,000

EMSCO D500 DUPLEX MUD PUMP  (Ref#6329T)  16” stroke, 500 hp, ductile iron fluid end, Cat D353 diesel engine with radiator, 640 hp, 1300 rpm, inline 6 cylinder, 4 stroke, 6-1/4” bore x 8” stroke, (1473 in3) displacement, turbo charged (air to air aftercooled) aspiration, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons.  Price:  $37,500

EMSCO D500 DUPLEX MUD PUMP  (Ref#6118Rh)  Emsco D500 duplex mud pump with steel fluid end, Hydril K-20-3000 pulsation dampener, belt driv with Cat D379 diesel engine, air starter, radiator, air clutch, mounted in 12’ x 29’L mud pump house with parts bin, controls  Price on Request

EMSCO D500 DUPLEX PUMPS  (Ref#8722R)  Two available, Cat 3406C diesel engine, Cotta gear box, mounted in enclosed building 11’6” x 30’  Price:  $70,000

EMSCO D500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP  (Ref#8312Tc)  500 hp, Mounted on skid with Cat D353 engine, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is  Price:  $27,500

EMSCO D500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP  (Ref#8312Td)  500 hp, Mounted on skid with twin Detroit engines, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is  Price:  $27,500

EMSCO DA-500 4-3/4 – 7-1/2” X 16” DUPLEX MUD PUMP  (Ref#8312Te)  500 hp, Mounted on skid with Cat D353 engine, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons, sold as is  Price:  $27,500

EMSCO D375 7-1/2 x 14”  (Ref#732Nb) no power, skid mounted  in metal house, 10’ wide  Price:  $43,000

Emsco 6-1/2” x 12” mud pump (ref#7542Ra) p/b 6V92 Silver Detroit 350 hp engine, skid mounted  Price:  $50,000

EMSCO D175 6-3/4” x 12”  (Ref#732Nc)  powered by twin 671 Detroit engines, on skid, battery start, controls, gauges, suction hose  Price:  $40,000

powered by twin 671 Detroit engines, on skid, battery start, controls, gauges, suction hose: $40,000

EMSCO 350 POWER END  (Ref#14583Th)  includes 3 rebuilt modules  Price:  $24,500

EMSCO D300 (Ref#3336T)  Detroit 60 Series engine  Price:  $32,500

EMSCO D300 PUMP  (Ref#3379T)  Cat D353 engine, skid mounted, sitting for a while  Price:  $28,500

CONTINENTAL EMSCO D300 MUD PUMP  (Ref#10287Tc)  14” stroke, powered by twin Detroit 671 engines, mounted on skid  Price:  $54,500

EMSCO D-300 6 X 14 DUPLEX MUD PUMP  (Ref#3360Tb)  Excellent condition, skid mounted on tandem axle heavy duty lowboy trailer, fluid end rebuilt with new 6” liners, liner cages, piston rods, swabs, rod packing, oiler pump, new Mattco end plug, Detroit 8V71 engine (good condition)  Price:  $44,500

CONTINENTAL EMSCO D175 7 X 12” MUD PUMP  (Ref#12068Nb)  powered by 8V71 Detroit engine, flued end and engine rebuilt, all new expendables, junk box, fuel tank, air compressor and air clutch, skidded.   Price:  $100,000

EMSCO D300 DUPLEX MUD PUMP (Ref#8210N)  7 1/2 x 14, Matco steel fluid end with screw off caps, Cat 3406 diesel powered, Air chamber, Spare fluid end parts, Air start, Fuel tank, On oilfield skid, Mounted in an 11’ wide metal building, Good condition   Price: $120,000

CONTINENTAL EMSCO F350 TRIPLEX MUD PUMP  (Ref#5440T)  6” plungers, John Deere Industrial engine, mounted on oilfield skid  Price:  $76,500

EMSCO 14” DUPLEX PUMP  (Ref#3800T)  Cat engine, skid mounted, working condition  Price:  $12,500

GASO 5885-WS  QUINTUPLEX PRODUCTION PUMP  (Ref#10309T)  Pump only.  5” stroke, 300 hp, steel billet fluid end, 2-3/4” ceramic plungers, Delrim disc valves, 838 packing, 6” RF suction connection, 3” RTJ discharge connection, 231 gpm max, 2020 psi, max 360 rpm  Price:  $82,500

GASO MODEL 5325M TRIPLEX MUD PUMP  (Ref#2481T)  pump end has all new parts, not used since, electric engine  Price:  $66,500

GASO 3673WS TRIPLEX PUMP  (Ref#6314R)  3 pistons, 6” stroke, steel fluid end, located South America  Price:  $60,000

GASO 3364 MUD PUMPS  (Ref#9104T)  Two available, rebuilt, cast ductile iron fluid ends, used for oil service, bare pumps, no engines, unmounted, one is flanged for suction/discharge, one is threaded  Price:  $20,000 each

GASO 7 X 10 MUD PUMP (Ref#2217Tb) with Detroit 8V71 engine, on single axle trailer, only 200 hours  Price:  $55,000

GASO 1849 MUD PUMP 4-1/4 X 6  (Ref#14583Tyyy)   Two available (one with Lambardini diesel, one with Waukesha URD 155 diesel)  Price:  $12,500 each

GASO 1860 4-1/2 X 6 MUD PUMP  (Ref#14394T)  Fluid end completely rebuilt, powered by 3 cyl Deutz diesel engine, trailer mounted, hoses and misc parts  Price $19,500

GASO MODEL 1742 5 X 10 MUD PUMPS (Ref#3276Rb)  John Deere 145 hp reconditioned engine with WPI snap in clutch, 90 gal diesel tank w/lock cap, Dayton oiler pump systemand tank, 4” suction hose and winch boom, 4’ back up bumper guard, front and rear loading hitches, 44” bullwheel with power band belt, large belt guard, 8’ x 17’ base (mud boat)  Price:  $62,500

GASO 1743 MASTER MUD PUMP  (Ref#5522Rb) skid mounted with Cummins engine  Price:  $47,500

GASO MODEL 1654 MUD PUMP  (Ref#6937T) 5 x 8, drive shaft included, new gears and bearings 2019, new pistons and piston sleeves 2021, new valve rubber inserts and valve cup gaskets 2022, very good condition  Price:  $18,500

GASO 5-1/2” X 10” MUD PUMP  (Ref#7097Ra)  bare pump, not mounted, 95% gear end  Price:  $15,500

GASO 5 X 10 DUPLEX MUD PUMP  (Ref#2199T)  Skid mounted, Detroit 6V71 engine, 5 speed manual transmission  Price:  $18,500

GASO 5 X 10 MUD PUMP (Ref#8705Ra), umounted, no engine “Make offer”

GASO T4507 TRIPLEX MUD PUMP  (Ref#999Nb)  Triplex single acting reciprocating plunger pump, 450 hp, reconditioned rental package, aluminum bronze fluid end with 5-1/2” plungers, 642 gpm@ 1095 psi, new AR valves (3/09), Cat 3406 engine,  260 rpm, max GPM 1039, Max PSI 1200, skid mounted, coolers, controls, gauges  Price:  $175,000

GASO 1550 MUD PUMP  (Ref#5896Rg)  trailer mounted, 471 Detroit POR

5x10 GASO MUD PUMP AND TANK SYSTEM  (Ref#240N)  350 gpm @ 330# psi, skid mounted trailer w/6V71 Detroit diesel engine, shale shaker 4 X 5 Schrem, 1000 gallon tank, (2) desanders, hydraulic motor on mud pickup pump  Price:  $65,000

GASO 4 X 6 MUD PUMP  (Ref#14556Tc)  skid mounted, 100 hp electric motor  Price:  $13,500

GASO 4 X 6 MUD PUMP  (Ref#11652RB) no engine, skid mounted  Price:  $8,750 each

GASO 4 1/2 X 6 MUD PUMP (Ref#6974Na) no power, unmounted, sitting 4 years  Price:  $6,500

AMERICAN DUPLEX MUD PUMP  - NEW  (Ref#14063N)  Model AXG (FG-AXG), capacity (with 5” liners) 200 gpm (757) x 310 psi (21 kgcm2), @ 100 rpm, bare pump, no engine  Price:  $25,000

AMERICAN FFA-XFZ 5 X 5 PISTON PUMP  (Ref#10769R)  140 hours, 150 gpm, 160 psi, 1 year old POR

UNION T68 TRIPLEX MUD PUMP  (Ref#999Na)  Triplex single acting reciprocating plunger pump, 6” plungers, 405 hp, 4.95:1 gear ratio, powered by 8V92T Detroit diesel engine and transmission, 617 @ 1061 psi at 210 rpm, Max GPM 620, Max PSI 1060, skid mounted, cooler, controls, gauges  Price:  $130,000

1600 HP F1600 TRIPLEX MUD PUMP  (Ref#1401N)  Made in China, electric motor, Model HHF1600, triplex single acting piston type, 7” x 12” max diameter of liner stroke, 120 spm, 1176kW (1600hp) rated power, gear ratio 4.206, 12” stroke of piston, pump valve API 7#, 7” max ID of liner, max working pressure 34.3 MPa (5000 psi), max displacement (130 s/min) 50.42L/s, diameter of discharge pipe 127mm (5”), diameter of suction pipe 304mm (12”), weight 25570kg (56,000 lbs).  combined v-belt transmission 800 kw (1072 hp) * 2, 25 (J)-5-7630 V-belt, transmission ratio 2.377, Model YZ08 motor 800kw, 60 hz, Model SB6”  8” J-12 1/2” charging pump, 8” diameter outlet, 6” diameter inlet, 200m3/h displacement, 55kW power of centrifugal motor  Price:  $425,000

BOMCO F-1600 MUD PUMPS  (Ref#6252T)  2 available, Built 2007, powered by 1500 hp GE traction motor  Model GEB29-A1, 5k fluid ends with pulsation dampener, liner washer pump and external oil pump, on a master skid with roof  Price:  $162,500 each

BOMCO 1500 MUD PUMPS  (Ref#320Tb)  (2) low output DC electric motors, 2 available  Price:  $99,500 CDN each

1600 HP RS-F1600 MUD PUMP  (Ref#4241T)  Built in 2014 by Rongshen Machinery (China)  Price:  $82,500

MSI 600 PUMP DOWN TRAILER  (Ref#1958Tc)  60 Series Detroit engine  POR

(2) 1600 MUD PUMPS MODEL 3NB WITHOUT POWER-NEW, NEVER USED (Ref#9504Ta) (Chinese made), short skid and pulsation dampener Price:  $55,000 EACH

1000 HP CHINES MADE TRIPLEX MUD PUMP  (Ref#10352Td) New/unused  Price:  $62,500

QINGZHOU ORF 1000 HP MZ-9 MUD PUMPS  (Two Available)  (Ref#2798R)  Manufactured 2007 and 2008, 7” x 9” 1000 hp triplex mud pump, 5000 psi pulsation dampener, 5-star 5x6 centrifugal pump 50 hp electric motor, suction screen, centrifugal rod oiler, (2) 2005 Detroit diesel 560 14L 665 hp w/ zero hours, electric start, radiator, gauges, Wichita power grip clutch, all master skidded  Price:  $255,000

CONTINENTAL EMSCO MODEL FC2200 TRIPLEX MUD PUMP  (Ref#2280T)  Complete without traction motors.  9” bore x 15” stroke, single acting, working pressure up to 7500 psi, (3) interchangeable forged steel fluid end modules with separate suction and discharge sections, Premium grade fluid end expendables with 6-1/2” pistons and liners, suction manifold with (3) 12” flanged inlets, SD8 suction desurger, pressure manifold with (2) 5-1/8” 10,000# API flanged outlets, liner wash system, 1 x 1-1/2” mission centrifugal pump p/b 3 hp electric motor, external power end lubrication pump, steel skid, suction line pressure relief valve, set of standard service tools  Price:  $675,000

CONTINENTAL EMSCO STYLE F-1000 (Ref#1939Na)
F-1000 Triplex Single Acting Mud Pump
All steel fabricated frame and eccentric crankshaft.
Wear-resistant crossheads and guides
Three (3) interchangeable FORGED steel fluid ends, each with threaded valve pot and cylinder head
covers, piston rods, liner lock and valve guides
Positive pressure lubrication of power end provided with internal gear pump.
Discharge manifold with Two (2) 4" 5000 Lbs. API flanged outlets
Suction manifold with Three (3) 10" flanged inlets with Two (2) companion flanges, One (1) 10"
threaded and One (1) 10” blind; remaining flanged inlet for mounting suction dampener
Pulsation dampener complete with 10" mounting flange and air valve
API #6 valves and seats with stainless steel springs
6" premium grade piston and liners. Fits API SA-4 piston rods.
NOTE: Other sizes and types available upon customer request
Liner wash system – one 1" × 1 1/2" centrifugal pump, 90 gallon reservoir, hoses and spray rings.
Strainer assembly complete with Two (2) 4" 5000# API studded outlets and One (1) inlet and One (1)
4” 5000# API ring joint flange outlet for pulsation dampener
Pulsation Dampener support for supporting strainer block and dampener.
Accessory manifold complete with One (1) 4" 5000# API flanged inlet and Two (2) outlets; One (1)
outlet with 3" NPT connection for relief valve and One (1) outlet with 2" NPT connection for pressure
gauge. Less gauge and valve.
One (1) Flange and fittings for strainer cross including studs, nuts, ring gaskets, flanges and fittings for
installing pulsation dampener, relief valve and pressure gauge
One (1) Relief valve, 3" 5000 psi Shear type
One (1) Pressure gauge
Structural Steel Three-Runner Skid
One year product quality manufacturer warranty
Gear Ratio: 4.207:1
Gross Weight: 41,000 lb
Pinion Shaft Extend (Diameter × Length): 7.75” × 13.23”
Suction Flange: 12”-NPT
Discharge Flange: 5-1/8”
Overall Length: 14 ft.
Overall Width (Without Strainer Block): 10.39 ft (7.71ft)
Overall Height (Without Pulsation Dampener): 5.91 ft


F-1000 Triplex Pump - Sizes and Ratings

Liner Size

Displacement

Maximum Pressure

Pump SPM

Input
HP

Input
HP

Dia.

Stroke

Per Stroke

Per Minute

inch

inch

mm

Gal.

Lit

SUNBO PUMP Product Page

Gal.

Lit.

PSI

MPA

6-3/4

10.0

254

4.58

17.4

640

2432

2378

16.4

140

1000

735

6-1/2

4.23

16.1

602

2288

2552

17.6

6-1/4

3.92

14.9

558

2120

2769

19.1

6

3.61

13.7

514

1953

3001

20.7

5-1/2

3.04

11.6

431

1638

3567

24.6

5

2.50

9.5

357

1357

4321

29.8

4-1/2

2.11

8.0

298

1132

5162

35.6

Note: mechanical efficiency 90%; volumetric efficiency 100%.
Made in China to API specifications. Immediately available USA.
Price: $120,000

EMSCO STYLE F1000 TRIPLEX PUMPS  (Ref#9886T)  2 available, 6-3/4” liners with 644 gpm @ 2380 psi, belt driven charging pump, pulsation dampener, with 398 Cat engines, skid mounted, ready to work  Price:  $112,500 each

CONTINENTAL EMSCO STYLE F-1000 UNITIZED (Ref#1939Nb)
PUMP UNITIZATION
-F-1000 mud pump is built to API specs under API 7K license.
-Master skid is standard oilfield three runner skid. Skid extended beyond engine approx 2’-0”, for protection at loading and unloading.
-Loading hitch is 7’-10” long for winch truck loading and unloading.
-F-1000 mud pump is driven by diesel engine (Caterpillar 3512DITA, 1250 HP @
1200rpm) through WPT power grip 321. The unit is complete with a bull wheel, a set of V-belts, belt guard, a drive assembly and screw devices for tightening belts.
-The unitization includes an electric motor powered supercharging pump piped to the suction of the mud pump, an electric powered liner wash pump mounted and piped, engine and WPT power grip 321 controls at area of engine arrangement, industrial coating on all parts and labor to clean & make ready for shipment.
F-1000 MUD PUMP
-Model: F-1000
-Type: Triplex liner single-action
-Input power: 1000 HP
-Maximum stroke: 10” (254mm)
-Maximum working pressure: 5,000 PSI (35 MPa)
-Gear type: Integral herringbone
-Valve pots: API 6 #
-Intake: 12” (305 mm)
-Discharge: 4” (102 mm)
-Pulsation dampener Model: KB-75
-Strainer: Mounted on discharge manifold out let.
CAT 3512DITA DIESEL ENGINE
-Model: CAT 3512DITA-Air start
-Rated power: 1250 HP
-Rated speed: 1200 RPM
-Rotation direction: Contraclockwise (facing flywheel)
-Outfitted w/ muffler & expansion joint.
CLUTCH – WPT POWER GRIP 321
-Max. speed: 1,525 RPM
-Static torque: 3,434,400 FT-LBS
-Dynamic torque: 2,574,000 FT-LBS
-Net weight: 738 LBS
CHARGING PUMP SYSTEM
Charging pump assembly includes explosion proof motor (dII BT4, IP55, class 4) and centrifugal pump.
-Type: SB6X5-14
-Displacement: 779 GPM
-Head: 105’
-Speed: 1750 RPM
-Seal type: Mechanical seal
-Motor power: 75 HP
-Motor voltage: 460V, 60Hz
MANIFOLD
-Pump suction manifold is 12”, and intake flange diameter is 12”. A 12” valve is used in suction manifold. And two suction solutions are alternative, pump charging and self-suction.
-The intake diameter of charging pump is 6”.
-The outtake diameter of charging pump is 5”.
-Discharging manifold includes gages, relief valve, and discharge flange.
TESTING & COMMISSIONING
- Install and secure major equipment and miscellaneous equipment
- Furnish lube products for testing
- Run diesel engine to test the unitization & pump, will run at full load 2 hours.
OVERALL DIMENSION AND GROSS WEIGHT
-Overall dimension(L×W×H): 315”×170”×114”
-Master skid dimension(L×W): 315”×120”
-Unitization gross weight: 79000 LBS
DOCUMENTATION
- Operating & Maintenance Manuals (1 set)-English
- Product Certificate (1 set) -English
- Part list Manual of mud pump (1set) –English


F1000 Unitization with CAT 3512DITA engine running at 1200 RPM and driving through a WPT power grip
321 and a belt reduction:

WPT 321-Belt

6" Liner

 

 

 

 

 

 

 

Item

Eng.
RPM

WPT321.
Ratio

Trans.
Output

Belt
Ratio

Pinion
RPM

Pump
Ratio

Stroke
SPM

Disp.
GPR

Disp.
GPM

1

1200

1.00

1200

2.038

589

4.206

140

3.673

514

2

1200

1.00

1200

2.038

589

4.206

140

3.673

514

3

1200

1.00

1200

2.038

589

4.206

140

3.673

514

4

1200

1.00

1200

2.038

589

4.206

140

3.673

514

Made in China to API specifications.
Price: $425,000

UNITIZED F-1000 MUD PUMP W/ CAT 3512 ENGINE (Ref#7389N)

PUMP UNITIZATION

-F-1000 mud pump is built to API specs under API 7K license.
-Master skid is standard oilfield three runner skid. Skid extended beyond engine approx 2’-0”, for protection at loading and unloading.
-Loading hitch is 7’-10” long for winch truck loading and unloading.
-F-1000 mud pump is driven by diesel engine (Caterpillar 3512DITA, 1250 HP @ 1200rpm) through WPT power grip 321. The unit is complete with a bull wheel, a set of V-belts, belt guard, a drive assembly and screw devices for tightening belts.
-The unitization includes an electric motor powered supercharging pump piped to the suction of the mud pump, an electric powered liner wash pump mounted and piped, engine and WPT power grip 321 controls at area of engine arrangement, industrial coating on all parts and labor to clean & make ready for shipment.
F-1000 MUD PUMP
-Model: F-1000
-Type: Triplex liner single-action
-Input power: 1000 HP
-Maximum stroke: 10” (254mm)
-Maximum working pressure: 5,000 PSI (35 MPa)
-Gear type: Integral herringbone
-Valve pots: API 6 #
-Intake: 12” (305 mm)
-Discharge: 4” (102 mm)
-Pulsation dampener Model: KB-75
-Strainer: Mounted on discharge manifold out let.
CAT 3512DITA DIESEL ENGINE
-Model: CAT 3512DITA-Air start
-Rated power: 1250 HP
-Rated speed: 1200 RPM
-Rotation direction: Contra clockwise (facing flywheel)
-Outfitted w/ muffler & expansion joint.
CLUTCH – WPT POWER GRIP 321
-Max. speed: 1,525 RPM
-Static torque: 3,434,400 FT-LBS
-Dynamic torque: 2,574,000 FT-LBS
-Net weight: 738 LBS
CHARGING PUMP SYSTEM
Charging pump assembly includes explosion proof motor (dII BT4, IP55, class 4) and centrifugal pump.
-Type: SB6X5-14
-Displacement: 779 GPM
-Head: 105’
-Speed: 1750 RPM
-Seal type: Mechanical seal
-Motor power: 75 HP
-Motor voltage: 460V, 60Hz
MANIFOLD
-Pump suction manifold is 12”, and intake flange diameter is 12”. A 12” valve is used in suction manifold. And two suction solutions are alternative, pump charging and self-suction.
-The intake diameter of charging pump is 6”.
-The outtake diameter of charging pump is 5”.
-Discharging manifold includes gages, relief valve, and discharge flange.
TESTING & COMMISSIONING
- Install and secure major equipment and miscellaneous equipment
- Furnish lube products for testing
- Run diesel engine to test the unitization & pump, will run at full load 2 hours.
OVERALL DIMENSION AND GROSS WEIGHT
-Overall dimension(L×W×H): 315”×170”×114”
-Master skid dimension(L×W): 315”×120”
-Unitization gross weight: 79,000 LBS
Available near Texas.
Price: $575,000

EWCO WH-600 TRIPLEX MUD PUMP  (Ref#1183N)  Manufactured 1984, good condition, powered by (2) Cat 3408 engines, mounted on oilfield skid, located Southeast Asia, immediately available  Price:  $190,000

EWCO 440 PUMP  (Ref#14583TJ)  Price:  $29,500

(2) EWECO 1000 HP MUD PUMPS  (Ref#1350R)  New, never used  Price:  $950,000 each

NEW CONTINENTAL EMSCO STYLE F-1000 TRIPLEX MUD PUMP  (Ref#1287N)  triplex single action piston, max. liner size x stroke 170 x 254mm (6-34” x 10”), 140 r/min strokes rating, 753kW (1000 hp), Herringbone gear, 4.207:1 gear ratio, pressure and splash lubrication, 12” flange suction inlet, 5-1/8” flanger 5000 psi discharge outlet, 7-3/4” pinion shaft dia., 2” x 2” key, valve-over-valve API#6, approx weight 41,420 lb, fully interchangeable with Continental Emsco parts, complete with pulsation dampener, suction discharge, pressure gauge, complete fluid end expendables, guaranteed for one year, delivered to Houston from China factory,  2 available  Price, delivered to Houston:  $185,000 each      (30% deposit with order, balance due when shipped from China)

CONTINENTAL EMSCO F-1000 MUD PUMP  (Ref#5850R) no engine, 8000 hours  Make offer

CONTINENTAL EMSCO F-800 TRIPLEX MUD PUMP  (Ref#664T) 800 hp, 6-3/4”, forged steel fluid end, 50003 pulsation dampener, 3” Shear relief valve, skidded  Price:  $37,500

OFM 600 TRIPLEX MUD PUMP(Ref#2497T)  Manufactured 2018, 1800 hours, very excellent condition, Detroit 60 Series engine, Allison transmission, 800 psi, dims/weight 20’ x 10’ x 8’, 20,000 lbs  Price:  $320,000 

AXON HD-500 TRIPLEX PLUNGER PUMP  (Ref#975T)  14 liter Detroit Diesel, 6061 Allison automatic transmission, rebuilt power end, new expendables in fluid end, new charge pump, skid, tanks, Pilfer 5 valve manifold, 15k fluid end, new paint  Price:  $215,000

BETHLEHEM H150 MUD PUMP  (Ref#5896Re)  10” suction  POR

WHELAND DUPLEX MUD PUMP  (Ref#7936)  7-1/2 x 14”, Hydril K-20 pulsation dampener, Cat D342 diesel engine, 300 bbl 3-compartment steel mud pit with (2) 7.4 hp electric mixer motors  Price:  $55,000

WILSON 600 DUPLEX MUD PUMPS  (Ref#9529Ra)  Two available, 8V71 Detroit engine  Price:  $105,000

WILSON 600 DUPLEX MUD PUMP  (Ref#2759Ta)  Detroit 60 series engine  POR

WILSON SNYDER MUD PUMPS (Ref#15581R) (2) available, skid mounted with Waukesha gas/propane engine, very low hours  Price:  $9,500 each

4 X 5 MISSION MAGNUM SANDBLASTER MUD PUMP (Ref#11425R) with hydraulic motor, only 40 hours  Price:  $12,500

MUD PUMP WITH COMPOUNDED 4 X 5 CENTRIFUGAL PUMP  (Ref#14663a)  Cat 3306 engine, mounted on dual axle trailer  Price:  $20,000

MUD PUMP WITH COMPOUNDED 4 X 5 CENTRIFUGAL PUMP  (Ref#14663b)  Cummins engine, mounted on dual axle trailer  Price:  $20,000

MISSION 3 X 4 PUMP  (Ref#10765T)  Trailer mounted POR

MISSION 3 X 4 PUMP  (Ref#8752Ra)  POR

WILDEN M8 AIR DIAPHRAGM PUMP  (11501T)  extra set diaphragms
AERMOTOR 66A80 10 HP 6” SUB PUMP Franklin Motor 230 Vac single ph with control box, mfg 1992, used rfor (1) 48 hr pump test
BRAND NEW IN BOX AERMOTOR A+35 SS-500 4” SUB PUMP, complete with Franklin 3 phase 230 VAC motor date code 6, no control box


BEAN PUMP  (Ref#8752Rb)  POR

FMC BEAN PUMP MODEL L1122DI  (Ref#3916T)  122 hp, 91 kw, 1750 max rpm, 127 gpm, 519 lpm, 1300 psi, 9063 kpa, Baldor ECP4409T 100 hp motor, 1200 rpm synchronous speed, 60hz frequency, 460V (3P)  Price on Request

FMC HYDRAULIC HIGH PRESSURE PUMP  (Ref#5653Rc)  Price:  $4,500

FMC TRIPLEX PUMP  (Ref#3979T)  Rated for 5000 psi, year 2000 (used as city sewer jetting unit), 730 hours  Price:  $6,500

PARTEK JETTING PUMPS  (Ref#3979Td)  20 gpm @ 10000 psi, 150 hp electric motors (needs electrical panels, otherwise complete)  Price:  $9,000 each

HYDRAULIC PUMP WITH KUBOTA ENGINE  (Ref#5073T)  Lofa Industries hydraulic pump (6.2 hours) with Kubota V3800T engine, Hydac ELD cooling system  Price:  $24,500

Bean 35 mud pumps  (Ref#7739R) completely rebuilt, skid mounted with Deutz diesel engine, 4 speed transmission, low 50 hours, stored inside   Price: $14,000

BEAN 35 PUMPING UNIT  (Ref#4292Ra)  trailer mounted, Wisconsin engine, battery start  Price:  $7,500

OILWELL C338H TRIPLEX WATER INJECTION PUMP  (Ref#6530T)  3” plungers, 3540 psi max pressure, 336 hp @ 200 rpm input, Cat G3408 gas engine, Falk gear/transmission, 100 rpm input, 290 rpm output, ratio 3.793:1, service factor 1.98, 375 hp  Price on Request SPRAGUE SYSTEM 0-55 GPM, 3500 PSI DUAL SYSTEM PORTABLE TURBO DIESEL HYDRAULIC PUMP  (Ref#9235R)  New Unit.  High pressure, low volume, self-contrained.  Capable of 5000 psi intermittent duty, designed for low maintenance and flow operation.  A single adjustable back pressure regulating circuit allows operator to adjust aircraft reservoir return condition and maintains a positive reservoir head pressure on the aircraft without fluid loss.  This feature allows the system to be used on drilling rigs with different reservoir pressure requirements.  Lighted control panel.  Automatic over temperature shut down, Reservoir high/low level automatic shutdown, Safety circuit boost pump pressure switch, loss of boost pump pressure automatically shuts system down, Phase reverse relay (does not allow pump to turn in wrong rotation), Automatic air removal device (this removes the air from the oil returning from the rig at flows up to 55 gpm automatically; results are no cavitation, longer pump life, quiet system.  Reservoir drain valve, Parking brake instrument panel lights 100 hp drive motor (Deutz 125 hp), International Reservoir and system fluid emperature indicator.  Chassis has a 2-wheel mechanical parking brake.  The lower portion of the chassis serves as f ull sized drain pan with drain valve.  Cabinet is skydrol resistant stainless steel.  Removable cover assembly for major maintenance with access doors for inspection and minor maintenance.   Price:  $185,000

HYDROPLEX 15K TEST PUMP  (Ref#2496R)  Manufactured 2012, 15 gallons per minute, mounted on 2008 GMC C6500 truck with diesel engine, control box, manifold, 550 gal heavy duty Snyder Megatainer tank, 123,896 miles on truck  Price:  $85,000

1000 HP CENTERIFLIFT (BAKER HUGHES) SUMP PUMP  (Ref#5526R) 1200 gpm, Electric DC, Manufactured 2008


PUMP SELECTION

INTAKE

DISCHARGE

Pump Selected

Pressure

22.07 PSI

972 PSI

IMW 15-1000WJJ1200A

Flowrate

1211 gpm

1208 gpm

Pshaft RPM 3444

Specific gravity

0.991 rel-HSO

0.994 rel-H2O

Pump shaft HP 58.9hz=859 (58%)

Viscosity

0.627Cp

0.651Cp

Required motor HP at 60 hz=890

 

 

 

 

SEAL SELECTION

 

 

 

Well angle (set depth = 0.005 deg fm vert.

Oil temperature at thrust chamber = 180 deg F

No sand present

Champer Cap used (top to Bot) =

Pump uses fixed type stages

32% 21%

Motor/Seal oil type – CL4

Thrust bearing load = 47%

Seal selected: ISFB3 (875 Series)

Shaft load = 44%

Options:  EHL

 

 

 

MOTOR SELECTION

 

Terminal voltage = 4083.7 V

Fluid Speed:  6.972 ft/s

Motor Current = 128.4 A

Shroud ID = 11.08 in

Load acc to N/P. = 89.0%

Internal Temp = 82 deg F

Shaft load = 38.6%

Motor slected: HMI 1000 hp 4160V 143A (725 Series)

 

 

CABLE SELECTION

 

Surface length = 100’

Wellhead voltage = 4126.8V

Tubing length = 1810’

Wellhead kVA 917.4 kVa

MLE length – 40’

Voltage drop = 43.1V

Surface Temp = 75 deg F

Cond Temp (main) = 163F

 

Temp rating = 450 deg F

 

 

SURFACE CABLE

#2/0 STR CELF  5kV 100 ft

MAIN CABLE

#2/0 STR CELF  5kV 1810’

MLE CABLE

#2 MLE-KLHT 5kV 40 ft

 

 

CONTROLLER SELECTION

 

Input kVa = 807 kVA

Voltage input = 480V

System kW = 774.8kW

Max Well Head Volts – 4127V

Max Ctrl Current = 1103.5A

Max Frequency = 58.9Hz (8.15V/Hz)

Power Cost/KwH = 0.05$/kW

Start Frequency = 10 Hz

Total Power Cost = $27891/month

Step-up Trafo = 8.597 ratio

 

Selected: VSD 8900-VT 1000kVA/ 480V / 1203A

New cost $550,000
Only 120 testing hours
PRICE:  $260,000

SCHAEFER & URBACH BT 80-120 GERMAN MANUFACTURED TRIPLEX MUD PUMPS, POWERED BY AC MOTOR AND GEAR DRIVEN  (Ref#6853N)  3 available “LIKE NEW”– Manufactured 2006, Speed Max/Count:  135 SPM, 220 bar – 350 bar (5000 psi), Max. Displacement 4,005 l/min at 150 bar, Max. pressure 1,565 l/min at 350 bar, Elin 6 AC Motor, 690V/75 Hz, 1000 KW, Mounted on skid 8100 mm long x 3000mm wide x 2960 mm high. 45,000kg, Sound level:  63dB(A)@ 7 meters, Operating hours:  (1) 1668, (2) 1010, (3) 2069, NOV Mission Magnum 8 x 6 x 14 charge pump, Amtec 36 kw AC Motor, 400/690V/50Hz, NOV Mission Magnum 3 x 2 x 13 liner cooler pump, 2,2 kW AC Motor 400/690V/ 50 Hz, Hydrill K20 pulsation dampener, Zollern gear / mud pump, Located in Europe
PRICE:  $620,000 EACH

MUD SYSTEMS

2016 MP255 MUD PUPPY  (Ref#3969T)  4 x 3 Mission Magnum mud pump, Detuz diesel engine  Price:  $105,500

MUD PUPPY MP255-100  (Ref#7876T)  Like new, manufactured 2012, 17 hours, Deutz 255 hp Tier 4 Interim diesel engine, built in drill pump to hook up to rig, mounted on 2 axle heavy duty trailer, 1000 gal tank, 3 hydraulic jacks  Price:  $112,500

MUD PUPPY MP255-100  (Ref#2653Ta)  Deutz diesel engine, mounted on heavy duty trailer  Price on Request

MUD PUPPY 2000  (Ref#7953T)  Manufactured 1999, 1000 gal holding tank, (2) 3 x 4 Mission Magnum pumps with mechanical seals, MC255-2C mud cleaner, sand guzzler, Versa-drill rig jacks, Perkisn engine, spare hyd pump and filters, well maintained, ready to work  Price:  $59,500

CUSTOM BUILT MUD PUPPY  (Ref#6133Ta)  800 gallon capacity, mounted on Big Tex trailer, 2” x 4” screen, 200 gpm, manual jack, no engine – runs off rig   Price:  $25,000

MUD PUPPY (SHOP BUILT)  (Ref#6044Tb)  Built 2019, 8 x 8 x 2’ 800 gallon tank, Mud Puppy shaker, 4 x 3 Mission Sandmaster mud pump, 3 x 2 recirculating sand pump, Perkins diesel 100+HP engine, 4” lift pump  Price:  $46,500 USD

MUD PUPPY MUD SYSTEM  (Ref#3572R)  3 x 2 Baker centrifugal pump, powered by 3 cyl Lister, Mud Puppy pick up pump, hydraulic power pack, barrel shaker, desander, dual 2000 gal mud tanks, mounted on gooseneck trailer  Price:  $60,000

2000 GALLON SHOP BUILT SHALE SHAKER  (Ref#15419Tc)  5 x 8 screen, 3 x 4 mission centrifugal pump, desanding cones, 300 gpm pickup pump, 2009 Cummins 110 hp motor with 7,150 hours, mounted on 3 axle trailer  Price:  $19,500

SHOP BUILT MUD MIXER  (Ref#8766T)  Moyno pump, on 10 hours on unit  Price on Request

MUD PUPPY  (Ref#4885Te)  Price:  $52,500

MUD PUPPY TRIPLEX PUMP  (Ref#11925Tb) Built 2012,  Price:  $265,000

1500 GALLON MUD SYSTEM  (Ref#8058T)  Duetz 50 hp diesel engine, 3 x 4 circulating pump  Price:  $29,500

ELGIN KEMTRON TANGO 400 MUD CLEANING SYSTEM  (Ref#976T)  Manufactured 2018, 1900 hours, trailer mounted, unit and trailer in good shape, currently working  Price:  $100,000

310 BBL 3-COMPARTMENT MUD SYSTEM  (Ref#1364N)  10’4” W x 10’2” H x 45’8” L, Tool house, steps, rails, motors and pumps  Price:  $15,000

EDGE MUD CONDITIONER  (Ref#5510RC) 600 gpm, 2 shale shakers, 1 400 gallon trash pump (1 more optional), 4 desander cones, 1 desander “Cobra” circulating pump, pintal hitch, air brakes, tank and system like new (low hours), 1200 gal tank, 4 hyd leveling jacks, tandem axle, Deutz 3 cyl air cooled diesel engine and hydraulic pumps in a removable pad,   Price:  $55,000

MCT500 MUD MAN MUD SYSTEM  (Ref#844R)  Manufactured 2007, rebuilt 2 years ago, 3300 gal 2-section tank, mounted on heavy duty trailer, 480 volt/3 phase, diesel generator, 500+ gpm capacity, 5” desilter cone bank, leveling jacks  Price (without generator)  $115,000  Price with generator:  $130,000

MCT-450 DRILL FLUID MIXING AND CLEANING SYSTEM  (Ref#3602T)  Built 2019, 156 hours, 2400 gal capacptiy two section tank, split equally for clean and dirty volume.  High G-force linear shaker, 18 sq ft shale shaker screening area, 18 sq ft desilter screening area, 36 sq ft total screening area with long runway, (6) 5” cones, 450 gpm cleaning capacity.  25hp 178 Series electric centrifugal pump to pressure feed hydrocyclones, 30 hp 178 series electric centrifugal pump to pressure feed hopper, jet guns and supercharge.  480 volt/60kw/3 phase diesel generator, safety shutdowns on engine and generator.  High shear/low pressure mixing hopper, sack table, high shear submersed jet guns in both tanks, independent valves to isolate hopper and jet guns, mounted on 12k dual tan axle trailer, pintle hitch, electric brakes, 24’L x 8’4”W x 12’4” H – 20,140 lbs.  Price:  $172,950

MUD TECHNOLOGY RST-990 MUD MIXING AND CLEANING SYSTEM  (Ref#3444T)  1000 gal (approx.) 2-section tank, H G-force linear split shaker, centrifugal pump for mixing and desander, 480 volt/3 phase generator, 320 gpm cleaning capacity  Price: $88,500

MUD SYSTEM (Ref#14202RC) with shaker & desander, electric start  Price on Request

MUD MIZER 2500 GALLON MUD SYSTEM  (Ref#8571T)  Deutz diesel engine  Price:  $26,500

WILCO SUPPORT SYSTEM  (Ref#10143Nb)  Manufactured 2006, 2500 hours
Gardner Denver mud pump rated at 1.7M/3 min @215 bhp with conventional heads, pulsation chamber, Odrill relief valve, 3.0” mud valve, exhaust fan, mixing hoper, liner wash pump and lubricator, driven by Eaton hydraulic pump with gear reducer and rubber block gear box. Pump house fitted with core bench, storage cabinets, insulated, fluorescent lighting, electric heat, 20 M/3 four compartment mud tank, electronic float levels, Tsunami sump pump, Mission 4x3 pre-charge pumps, Derrick FC-313M liner motion shale shaker with super G agitator.  All ancillary equipment hydraulically driven off Funk rubber block four pump adaptor powered by C15 Cat engine rated at 540 HP @ 1800 RPM. Aluminum 1500 liter hydraulic tank. Operators cabin – heated, AC, swivel operators chair, deck/spot lights, full instrumentation, audio/video monitoring system, roof beacon, Retractable stairway. Aluminum fuel tank. Self-leveling deck. Pontoons 6’ X 6’ X 38”, four compartment, aluminum cleats, 5.0” chain.
PRICE:  $210,000

EDGE DRILLING PS750 MUD RECYCLER/AIR CONTAINMENT SYSTEM  (Ref#2642T)  Brand new, never used, 750 gallon tank, 74 hp Tier 4F/Tier 5 European Hatz water cooled diesel engine, 3 x 5 double screen shaker bed, 3 x 4 centrifugal pump, 4 desander cones, with powder coat finish  
Price, skid mounted:  $77,000
Price, mounted on 2 axle trailer with outrigger jacks:  $93,000

2007 MUD TECH MUD SYSTEM  (Ref#8728N)  down hole pressure pump, shaker, generator, sanding cones  Price:  $45,000

MUD TECHNOLOGY MC-160 MICRO PORTABLE 1200 GALLON MUD SYSTEM  (Ref#5074Ta)  2 compartment, trailer munted, 30 kw diesl generator, south attenuated weatherproof enclosure, single high G-force liner shaker with split screens, high shear submersed turbo jet guns, desilter with 5” hydrocyclone, (3) 2 x 3 centrifugal mud pumps, 110 volt outlets for accessories, hopper with sack table, easy open cleanouts, mounted on tandem axle pintel hitch trailer, currently working  Price:  $37,500

MUD SHAKER  (Ref#4102Rd)  mounted on 16’ trailer, Mud Hog transfer pump, 2 cylinder diesel engine, screens, and sand cyclone – needs work

180 BBL WORKING PIT WITH HOUSES  (Ref#9529Rc)  w/shaker and more, good shape  Price:  $47,500

HDD MUD MIZER (Ref#4330Nc) Deutz diesel engine, 1000 gallon tank, (2) 2 x 3 pumps with 1 7/8” pump shaft  Price:  $37,000

500 BBL MUD SHAKER TANK  (Ref#4355Ta)  62’L x 11’6”W x 7’H with three partitions, (2) 5 x 6 centfifugal pumps powered by 75 hp electric motors, sandblasted and eopoxy painted 2013 
300 BBL MUD SUCTION TANK  (Ref#4355Tb)  55’L x 11’6”W x 7’H with three partitions, (2) 5 x 6 centfifugal pumps powered by 75 hp electric motors, sandblasted and eopoxy painted 2013 
PRICE FOR BOTH:  $39,500

MUD MIXING SYSTEM  (Ref#10825Ta)  rig tanks and mud systems, pumps and agitators, bag hopper, 10’ wide x 40’ long, POR

1994 IH MUD CONDITIONING TRUCK  (Ref#14583Tc)  with pit and shaker, Aplex SC170 pump  Price:  $37,500

NEW USA BUILT 500 GALLON MUD MIXER  (Ref#14777T)  3” multiquip mixing pump, gast mixing for gel and kentonite grouts, fork pockets, skid mounted, dual mxing funnels, can mix 500 gallons in 1.5 minutes  Price:  $13,500

NEW 200 BARREL MUD PIT (Ref#12652Tb) With walkways, handrails, and hydraulic powered shale shaker. Oilfield skid mounted. Price: $50,000
Terms: 40% deposit with order, balance upon completion. Delivery 2 months or less.

MUD SYSTEM (Ref#11973T)  Gardner Denver PAH triplex pump, 450 hp Cat engine, 40 kw gen set, 500 gal fuel tank, hight lights, covered operator’s station, approx. 20 bbl mud pit with mixer, shaker, mounted on 2007 Transcarft 100k trailer, very good clean unit  Price:  $138,500

2002 REVERSE CIRCULATION MUD CLEANING SYSTEM  (Ref#8379Ta)  4500 gallons, (2) 4 x 5 scalping shakers, (1) 4 x 5 linear desilting shaker, 5 x 6 centrifugal desilting pump (800 gal per minute capacity), 5” desilting cones, (2) additional tanks available which will provide 20,000 gallon circulation system, semi-mounted with air bag suspension (extra axle comes with unit)  Price:  $140,000
Also available:
(2) near new 7500 gallon tanks skid mounted that can go with this unit. The extra tanks hook up to the reverse tank to comply with Los Angeles Co 20000 gal requirements for reverse circulation drilling.   Price $20,000 each

2002 MUD CLEANING SYSTEM WITH CENTRIFUGAL DESILTING PUMP  (Ref#8379Tb)  direct rotary circulation 4500 gallons, (2) linear shakers (600 gal – scalping and desilting), 5 x 6 centriugal desilting pump (800 gal per minute capacity), 5” desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi mounted  Price:  $190,000

BROCK DIRECT CIRCULATION CUSTOM MUD CLEANING SYSTEM  (Ref#8376Ta)  2000 gallon, (2) deck shaker/scalping and desilter (500 gpm capacity), (2) 3 x 4 centrifugal pumps (500 gpm capacity), 5” desilting cones, electric powered pumps, 75 kw Onan gen set with Tier 3 Cummins engine (low hours), all electric with control panels, mud mixer, Mission Sandmaster electric pickup pump, outriggers, trailer mounted. Low hours on entire unit  Price:  $140,000

DIRECT ROTARY CIRCULATION MUD CLEANING SYSTEM  (Ref#8376Tb)  4500 gallons, (2) linear shakers (600 gallons – scalping and desilitng), 5 x 6 centrifugal desilting pump (800 gallons per minute capacity), 5” desilting cones, 5 x 6 Mission Sandmaster pickup pump, all electric with control panels and lighting, mud mixers, semi-mounted  Price:  $215,000

TULSA RIG IRON  (Ref#14588T)  200 gpm, self contained with generator, (2) 2 x 3 centrifugcal pumps (one for mixing hopper qand the other to run (2) 5” desander cones, 3 panel screen shaker, 2400 gal tank, diesel engine, mounted on two axle trailer  Price: $29,500

RIG BUDDY MUD SYSTEM  (Ref#14586T)  2 panel shaker, Honda 23 hp motor, 2 desander cones, self contained and portable (does not need a pick up pump to function)  Price:  $32,000

PORTABLE MUD SYSTEM  (Ref#8096T)  4 x 4 mud pump, 100 gallon tank, 3 desanding cones, 45kw Cat gen set and power controls, mounted on tandem axle trailer, fully operational  Price:  $50,000

MUD CLEANING SYSTEM  (Ref#10429TA)  1500 gal, shaker/desanders, 5 x 10 piston pump, mounted on 30’ trailer  PRICE:  $41,500

KEM-TRON SHAKER  (Ref#12914Tb)  500 gallon  Price:  $26,500

SHALE SHAKER-CUSTOM BUILT  (Ref#2571Te)  3” sand guzzler, 600 gal tank  Price:  $23,500

 

 

Are you interested in learning more about mission sandmaster pump? Contact us today to secure an expert consultation!