How to recognize damage to forklift parts.

27 Mar.,2025

Forklift in the work of parts strain degree of damage, in the use of forklift we need to determine the degree of damage to the parts to identify the impact of forklift in use, then what methods can be used to determine the degree of damage to the parts?

 

How to recognize damage to forklift parts.

 

Forklift in the work of parts strain degree of damage, in the use of forklift we need to determine the degree of damage to the parts to identify the impact of forklift in use, then what methods can be used to determine the degree of damage to the parts?

 

1. Impact on performance and operating mechanism: some parts in the wear, although still able to complete the use of the function, but reduces the performance, such as transmission gear wear can still transmit the intended torque and speed, but because of the clearance is too large, the noise increases, the efficiency is reduced, so that the transmission of the smoothness of the damage, it is necessary to decide according to the extent of the wear and tear to repair or replacement.


2. Impact on efficiency: when the parts wear, will lead to a reduction in efficiency. Such as cylinder and other parts wear, will affect the efficiency of the engine, should be based on the specific circumstances of wear and tear to decide whether to repair some parts.


3. general parts whose wear has exceeded the tolerance, but does not exceed the next level of fit tolerance, can continue to use.

 

4. Parts of the repair method of economy: in order to ensure the quality of repair under the premise of repair costs and repair the service life of the ratio to be lower than the replacement of new parts after the manufacturing (or outsourcing) costs and replacement of new parts after the service life of the ratio.


5. parts due to wear and tear and can not fulfill the intended function, such as clutch loss of power transfer, hydraulic parts can not reach the intended pressure, cam gas distribution system can not maintain the intended movement rules, such as the above, it must be replaced or repaired.


6. According to the forklift maintenance process, in order to repair the worn parts of the technological capabilities and conditions to determine the repair or replacement.