How to Fit Plastic Skirting Boards Perfectly?

How to Fit Plastic Skirting Boards Perfectly?

1. What tools do I need to fit plastic skirting boards?

   To fit plastic skirting boards, you will need the following tools:

   • Measuring tape
   • Cutting saw or mitre box
   • Adhesive or screws
   • Spirit level
   • Pencil
   • Caulk and caulking gun
   • Sandpaper or file (optional)
2. How should I measure for skirting boards?

   To measure for skirting boards, follow these steps:

   1. Use a measuring tape to measure the length of each wall where the skirting will be fitted.
   2. Take note of any corners or angles where the boards will need to be cut.
   3. Always measure twice to ensure accuracy before cutting the boards.
3. What cutting techniques should I use?

   When cutting plastic skirting boards, the following techniques are effective:

   1. For straight cuts, use a fine-toothed saw. Ensure that your cut is smooth to prevent any rough edges.
   2. For corners, use a mitre box to cut the boards at a 45-degree angle. This will help the pieces fit together neatly.
4. How do I attach the skirting boards?

   Attaching skirting boards is straightforward. You can choose between adhesive or screws:

   1. If using adhesive, apply a generous line to the back of the board and press it firmly against the wall. Use a spirit level to ensure it’s straight.
   2. If using screws, drill pilot holes into the skirting board and the wall, then fix the boards in place with screws.
5. What should I do after fitting the skirting boards?

   After fitting the skirting boards, consider the following steps:

   1. Fill any gaps or seams with caulk for a smooth finish. This will help in hiding any imperfections.
   2. Use sandpaper to smooth any rough edges if necessary.
   3. Finally, clean the boards and the area to remove any adhesive residue or dust.

By following these steps, you can ensure that your plastic skirting boards fit perfectly and look great in your space.