More blog items
Many fastenings involve the use of washers. But people often ask the questions: what are washers for and are they essential? In this post we aim to provide all the information you need on the subject of washers including how they are used, the various types that exist, the materials they are made from and the standards they are required to meet.
A washer is a perforated plate or disc, made from a variety of materials, that’s sandwiched between two surfaces subject to rotative friction. For example, between a threaded fastening, such as a bolt or a screw, and the surface into which the fastening is bolted or screwed. We’re all familiar with metal disc washers, such as ‘penny washers’, commonly used in a variety of applications.
The origin of the word ‘washer’, in this context, is not known but it has been used since the 14th century when it was spelled ‘whasher’ and defined as “an iron hoope, amongst gunners called a whasher, which seves to keepe the iron pin at the end of the axeltree from wearing the nave”. This reference appears to describe the use of washers in gun or canon axle assemblies where the washer prevented wear.
People often question whether washers are essential in fastenings. Here are the main reasons why washers are used and the functions they perform.
Washers help ensure the integrity of fastenings, enabling them to remain tight and secure, often under extreme conditions involving vibration, stress and pressure.
Square WasherWashers take many forms but can be broadly categorised as either plain washers or spring washers.
Plain washers distribute the load imposed by a tightened fastening, preventing surface damage and ensuring the fastening is secure. Plain washers are also used in electrical applications.
Spring washers are typically used to prevent fastenings from loosening due to vibration. Locking washers are a form of what are effectively spring washers that are intended to prevent fastenings from becoming loosened.
Washers are available in many forms, which can be confusing. Flat washer forms are classified from A to F where each classification identifies the outside diameter of the washer along with its thickness. Here’s a summary of the primary and most popular washer forms and designs along with their typical applications.
Round washers with a central perforation are the most common washer form design, but other shapes are also sometimes used. For example, square washers are often used for specific applications such as roofing.
Form A flat washers are one of the most ubiquitous washer forms, used in almost every assembly. These are often manufactured to conform with the DIN 125 standard.
Form B flat washers are like form A but are thinner. Manufactured to BS4320 standard.
Form C flat washers are the same thickness as form A but are of slightly larger diameter. Manufactured to BS4320 standard.
Form D flat washers are thin, like form B, and larger diameter like form D. Manufactured to BS4320 standard.
Penny Washer
Penny washers are also known as fender washers or repair washers. These are amongst the most widely used and recognised form of flat washer. They have a large diameter and are typically used to protect surfaces when tightening fastenings.
Spring washers are available in a variety of forms, typically used to help prevent bolted joints from loosening due to vibration. Here are some of the most common forms of spring washer.
Square Section Spring Washer
Square section spring washers are generally used with socket head style screws and bolts. Manufactured to DIN 7980.
Rectangular Section Spring Washer
Rectangular section spring washers are generally used with hexagon head bolted fastenings. Manufactured to DIN 127.
Conical Spring Washers
Conical spring washers, also known as Belleville washers, disc spring washers, coned-disc spring washers and cupped disc washers. These have a distinctive, conical cup shape which acts as a spring when under pressure in a fastening. Manufactured to DIN 6796.
Wave Spring Washer
Wave spring washers are another commonly used type of spring washer that helps prevent fastenings from loosening when subject to vibration. Manufactured to DIN 137.
Locking Shakeproof Washers
Locking or shakeproof washers typically feature serrations around either the internal or external washer edges. They are designed to help prevent the accidental loosening or release of a fastening. Commonly found on electrical connections such as car batteries.
Anti-loss or retaining washers typical feature small protrusions from the central hole which prevent the washer from slipping off a matching fastening bolt.
Spacer washers are sometimes used to enable fastenings to be effectively tightened, sometimes by stacking multiple spacer washers.
Saddle washers are specifically designed for use with round tubing such as that used to manufacture camping chairs and folding furniture.
Countersunk or Cup Washers
Cup and countersunk washers are primarily used for aesthetic purposes, protecting or concealing the head of a fastening. Cup washers may also involve a cap which will completely conceal the screw or bolt head.
Washers are available in a variety materials both metallic and non metallic.
Steel is by far the most commonly used metal for washers. Carbon steel, spring steel and various grades of stainless steel are typically used in various applications. Other metals used to manufacture washers include: zinc, iron, copper, brass, aluminium and titanium.
Corrosion resistance is an important attribute so many steel washers undergo treatments such as metallic coating (e.g. zinc), electroplating, chemical plating or browning (sometimes called bluing).
Materials used to manufacture not metallic washers include:
Non metallic washers can provide a number of benefits over their metallic counterparts, in some applications. For example:
The UK began moving away from the traditional, imperial system of weights and measures, originally established in 1824, to the metric system in 1965. The dimensions and measurements for nuts, bolts washers and fastenings on sale in the UK today are all defined using metric units.
The Unified Thread Standard (UTS) is commonly used in the United States and Canada as the main standard for nuts, bolts and a variety of fasteners. UNC stands for ‘unified coarse’ and UNF refers to ‘unified fine’. UNC and UNF washers are designed to be used with respective nuts and bolts for which they will provide the required clearances.
When specifying and ordering washers you will typically need to define:
In addition you will need to specify the washer form (as previously noted, form A...F) along with the washer material and required finish.
High quality washers are manufactured to conform with defined standards. Typically you might see ISO 7089, DIN 125 and BS4320.
ISO stands for International Standards Organisation and the ISO 7089 standard defines the requirements for what are called: normal-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes.
DIN stands for "Deutsches Institut für Normung", meaning "German institute for standardisation". The DIN 125 standard aligns with the ISO 7089 standard for washers.
BS refers to British Standards. BS4320 is the standards specification for metal washers for general engineering purposes.
Remember that if you have any questions regarding security fastenings and how to improve your security - we are here to help. Give us a call on 01273 475500 and we’ll give you some free, expert advice.
This message was added on Wednesday 10th March 2021
For more information washers suppliers, please get in touch with us!