Choosing the right type of face mask has never been more crucial than now, and although large quantities of quality face masks may be hard to source, it’s important not to simply select the cheapest, or those available in the largest quantities. Take your time to find one that is the right grade for your application, to ensure you get the safest and most relevant protection possible.
Surgical face masks are generally graded through ASTM (American Society for Testing and Materials), which publishes the technical standards for products, materials, systems and the likes. There are currently around 12,000 ASTM standards in use worldwide.
Not all masks are graded so make sure you check that your product of choice has an ASTM grade or is from a reputable manufacturer. This will ensure you are comfortable that you have the appropriate level of protection, and thus minimising the risk in your workspace, whether it be surgery, pathology, or research.
Ensure you find masks which have the ASTM level printed on the box, with the level of fluid resistance (see table below) shown. If this is not present, the masks are non-compliant with Australian standards and regulations.
Which mask is which?
As per the test results, masks are rated numerically, on the barrier performance of the material.
Key Testing Metrics:
Masks are tested to five key performance criteria:
The more resistance the mask offers to any of these criteria, the higher the grade, and thus the higher the protection. Higher protection masks are more suited to surgery or working with chemicals, however, will not protect again vapours, which will need a respirator.
It is important to ensure you are thorough with your research to find the most appropriate PPE when procuring. Get in touch with a PPE consultant at Santé for specification sheets for Level 1, 2 and 3 face masks.
TEST Level One Mask Level Two Mask Level Three Mask ASTM F1862 (Fluid Resistance) 80 mmHg 120 mmHg160 mmHg
MIL-M-36954 C (Breathability) <4 mm H20 <5 mm H20 <5 mm H20 ASTM F2101: Bacteria Filtration Efficiency (BFE) (Filtration 3μm) ≥ 95% ≥ 98% ≥ 98% ATSM F2299: Particle Filtration Efficiency (PFE) (Filtration 1μm) ≥ 95% @ 0.1 micron ≥ 98% @ 0.1 micron ≥ 98% @ 0.1 micron 16 CFR Part 1610 (Flammability) Class One Class One Class OneIn conclusion, it is of also of note that even the ASTM-Rated face masks do not necessarily provide all the respiratory protection from airborne diseases. To further reduce the risk of breathing in airborne disease particles, a fit-tested respirator is required. For more information on Surgical Respirators, read our Product Focus on N95 NIOSH-Approved Respirators.
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of medical mask suppliers.