The Arducam monochrome (B&W) global shutter VGA resolution OV7251 camera module is mainly designed for Raspberry Pi boards, and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware.
This OV7251 camera module is compatible with the official V4L2 camera driver, and you can also use Arducam SDK for higher frame rates. The sensor’s global shutter and excellent low-light sensitivity allow it to be used for any application that needs gesture detection, head, and eye tracking, and depth and motion detection.
Specifications:
Sensor: Monochrome global shutter OV7251
Pixel Size: 3 μm x 3 μm
Active array size: 640*480
Optical Size: 1/7.5 inch
EFL: 1.3mm
F.NO: 2.2
IR Sensitivity: sensitive to IR, without IR filter (Check visible light version with SKU: B0161)
FOV: D86.5 Deg./H72.9 Deg./V57.7 Deg.
Focusing Range: 65mm ~ infinite
Output interface: 2-lane MIPI serial output with the official driver; 1-lane MIPI serial output with Arducam SDK
Output formats: RAW
Maximum image transfer rate: 640 x 480@30fps with the official driver; 640×480@120fps with Arducam SDK
Board Size: 40mm x 40mm
Camera connector: BBR43-24KB533
Board connector: BBR13-24K6417
Applications:
Cellular phones
Toys
Tablets
Machine vision
ARM/FPGA/DSP based platforms
Documents:
Warranty:
Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.
Package Includes:
1 x Arducam OV7251 0.3MP Monochrome Global Shutter Camera Module NoIR
1 x 150mm 15pin 1.0mm FPC cable
1 x 73mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
For more information 0.3MP Global Shutter Camera, please get in touch with us!